DODGE P2B-SCAH-25M pillow block bearing

DODGE P2B-SCAH-25M is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-SCAH-25M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCAH series pillow block is a mounted unit that combines a cast iron housing with an insert ball bearing, already aligned and lubricated from the factory. It is used to support rotating shafts in conveyors, fans, mixers and power transmission equipment, where a rigid base with two mounting holes is required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with technical advice to choose the right size according to the shaft diameter and working conditions.

The SCAH series designation is read in blocks: P2B indicates a two-hole pillow block, SCAH identifies the housing family and the insert type, and the final number with the letter M indicates the bore size for the shaft. That is why references such as P2B-SCAH-17M, P2B-SCAH-20M or P2B-SCAH-35M coexist: the shaft diameter changes, not the housing geometry. The suffix M distinguishes the metric mounting variant within the series. With the full part number, the unit you need is identified without ambiguity.

These pillow blocks appear in food, beverage, aggregate processing, pulp and paper plants, and in packaging lines. They are also found in air conditioning equipment, conveyor belts, bucket elevators and machine tools. In Argentina they are chosen for the robustness of the cast iron housing and for the ease of replacing the insert without completely disassembling the shaft. MR Accesorios Industriales sells them for maintenance and new projects throughout the country.

To select correctly, start from the shaft diameter required by the equipment and check the radial and axial load of the mounting. Check the insert sealing: in dusty or humid environments, additional protection is advisable. When mounting, rest the housing on a flat, clean surface, tighten the mounting bolts in a cross pattern and check alignment with a straightedge or dial indicator. The insert lubrication comes from the factory; in service, follow the equipment's greasing plan and avoid excess that could damage the seals.

Mounted units of this type are interchangeable between manufacturers if the shaft diameter, center height, distance between holes and insert locking type match. When requesting an equivalent, provide the full part number and the main dimensions: with that, the compatible unit is identified. Do not mix inserts from different series within the same housing, because the outer ring and locking system vary. If in doubt, ask us and we will indicate the alternative that best fits your equipment.

If you have the part number of the unit you are replacing, send it by WhatsApp to MR Accesorios Industriales along with a photo of the mounting. We will quote the DODGE SCAH reference and support you during commissioning. We handle technical maintenance, purchasing and project inquiries from Buenos Aires, Argentina, for all industry.