Pillow block bearing DODGE P2B-SC-101

DODGE P2B-SC-101 is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SC-101 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SC series pillow block with insert bearing is a mounted unit that combines a cast iron housing with a self-aligning ball bearing and an insert locked to the shaft. It is used to support drive shafts in equipment where smooth rotation, tolerant alignment and simple mounting on a flat base are required. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina.

The designation is read in blocks. The letter P indicates pillow block, the number that follows defines the position and housing type, and B indicates the split or two-piece mounting. The SC block identifies the insert bearing series, and the final three-digit suffix corresponds to the shaft diameter: that is why codes such as P2B-SC-008, P2B-SC-010, P2B-SC-012, P2B-SC-014 and P2B-SC-015 coexist for metric shafts, and P2B-SC-100, P2B-SC-101 and P2B-SC-102 for inch sizes. The SCH-E series follows the same logic with housing variants.

These pillow blocks appear in belt conveyors, bucket elevators, mills, mixers, centrifugal pumps, fans and packaging lines. In the Argentine market they are found in food plants, cement plants, cold storage facilities, tanneries and aggregate processing sites, where a dust-laden or humid environment demands a robust housing and a protected insert. They are also common in material handling equipment and in agricultural machinery that works outdoors.

To select correctly, start from the shaft diameter and the radial and axial load of the equipment. The SC series insert tolerates some initial misalignment, but the base should be supported on a rigid, flat surface, the anchor bolts tightened and the parallelism with the opposite shaft verified. The insert seal defines the behavior against dust and water: in dirty environments or with frequent washdown, choose the variant with the better seal. Lubrication is renewed according to service hours and load type.

Cross-references between brands are resolved by shaft number, housing type and insert series, not by the commercial code. A pillow block from another brand with the same diameter and configuration can replace the original if the anchor distances and the center height match. When space or load does not allow a direct equivalent, MR Accesorios Industriales evaluates the alternative and, if needed, manufactures the housing to measure.

If you already have the equipment code or the shaft size, send it by WhatsApp to MR Accesorios Industriales and we will quote it shortly. We can also indicate the compatible alternative within the DODGE line or from our in-house manufacturing. With more than 80 years in the field, we support the technical selection and replacement of every pillow block.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.