Pillow block bearing DODGE P2B-GTUAH-104S

DODGE P2B-GTUAH-104S is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-GTUAH-104S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE ER-Series pillow block is a mounted pillow block bearing that combines a ball insert with a cast iron housing to secure rotating shafts to the structure. It is used in equipment where the shaft must be supported and aligned, with built-in lubrication and sealing for environments with dust or humidity. MR Accesorios Industriales carries this DODGE line, an official brand that MR carries, with technical advice to choose the correct configuration.

The ER-Series designation is organized by the type of pillow block and the shaft diameter. In the code P2B-GTUAH-104S, the first part identifies the split or split-type pillow block housing, and the final block indicates the shaft size in inches. The letters GTUAH correspond to the sealing and locking configuration of the insert. Knowing this logic allows you to order the correct replacement without relying on a photo or physical sample.

These pillow blocks are used in belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and aggregate plants. In Argentina they are common in the oilseed, meatpacking and waste treatment industries, where the environment demands effective sealing against dust and water. They are also used in fans and medium-sized centrifugal pumps.

To select the pillow block, verify the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal defines the protection: versions with a single lip seal are for dry environments, while multi-lip versions withstand washdowns and humidity. Mounting requires aligning the pillow block with the shaft, tightening the locking bolts and lubricating according to the type of grease indicated for the application.

DODGE ER-Series pillow blocks are interchangeable with other brands of mounted pillow block bearings that use the same shaft standard and hole spacing. When requesting a quote, it is advisable to provide the complete code and the working conditions so that MR Accesorios Industriales can indicate the compatible alternative or in-house manufacturing if a special configuration is required. Interchangeability depends on the housing and insert dimensions, not only on the shaft diameter.

If you need to replace an existing pillow block, send the code stamped on the housing or the shaft and mounting hole dimensions on WhatsApp. At MR Accesorios Industriales we will quote the corresponding DODGE ER-Series reference and advise you on mounting and lubrication. We can also evaluate an in-house manufacturing solution if the original pillow block is no longer available.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.