Pillow block bearing DODGE P2B-GTM-307

DODGE P2B-GTM-307 is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-GTM-307 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GT/GTM series Y-bearing insert pillow block is a foot-mounted bearing unit: the assembly combines a split cast iron housing with a ball insert bearing, already aligned and lubricated. It is used to support rotating shafts in transmission, conveying and process equipment where rigidity and ease of mounting are required. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you on choosing the correct size for your shaft.

The GT/GTM series designation is read in blocks: the P2B prefix identifies the two-bolt split pillow block housing, and the final number indicates the shaft size. For example, P2B-GTM-012 corresponds to a 12 mm shaft, while P2B-GTM-100, P2B-GTM-103, P2B-GTM-107, P2B-GTM-108, P2B-GTM-111, P2B-GTM-112 and P2B-GTM-115 cover different metric sizes. The GTM suffix indicates the insert with series-specific features, such as the locking and sealing type. The complete part number unambiguously identifies the unit you need.

These pillow blocks are used in belt conveyors, bucket elevators, mixers, mills, pumps, fans and packaging lines. In Argentine industry they appear in food, cement, mining, paper and aggregate processing plants, where the environment often has dust, moisture or frequent washdowns. Thanks to their robust construction and cast iron housing, the GT/GTM series handles moderate radial loads and shafts rotating at medium speeds, with the advantage that the insert bearing can be replaced without disassembling the entire housing.

To select the pillow block, start with the shaft diameter and the load type: if there is axial load, check that the insert can handle it. Review the sealing according to the environment: in areas with water or fine dust, a tighter seal is advisable. During mounting, seat the pillow block on a flat, rigid base, align both halves before tightening the bolts and check that the shaft is parallel to the equipment. The insert is lubricated through the grease fitting; use the specified grease and do not mix different bases. Careful alignment extends bearing life and prevents vibration.

As for equivalents, Y-bearing insert pillow blocks are interchangeable between manufacturers if the shaft diameter, center height, bolt spacing and insert locking type match. DODGE GT/GTM series have counterparts in equivalent lines from other brands, but it is not advisable to rely on the part number alone: the housing dimensions and shaft locking system must be compared. If you need to replace an existing unit, send us a photo or the part number stamped on the pillow block and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the DODGE brand in Buenos Aires, Argentina, with more than 80 years of experience in bearings, pillow blocks and power transmission. If you have part number P2B-GTM-012 or any other reference in the series, write to us on WhatsApp and we will get back to you shortly with a quote. We can also advise you on the right insert, sealing or lubrication for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.