DODGE P2B-GTM-108 pillow block bearing

DODGE P2B-GTM-108 is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-GTM-108 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE GT/GTM series Y-bearing with insert bearing is a pillow block mounted bearing: the unit combines a split cast iron housing with a ball insert bearing, already aligned and lubricated. It is used to support rotating shafts in transmission, conveying and process equipment, where rigidity and ease of assembly are required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you to choose the correct size for your shaft.

The GT/GTM series designation is read in blocks: the P2B prefix identifies the two-bolt split pillow block housing, and the final number indicates the shaft size. For example, P2B-GTM-012 corresponds to a 12 mm shaft, while other codes in the series cover different metric sizes. The GTM suffix indicates the insert with specific series features, such as the locking and sealing type. With the complete code, the unit you need is identified unambiguously.

These housings are used in belt conveyors, bucket elevators, mixers, mills, pumps, fans and packaging lines. In Argentine industry they appear in food, cement, mining, paper and aggregate processing plants, where the environment often has dust, humidity or frequent washdowns. The GT/GTM series, due to its robust construction and cast iron housing, responds well to moderate radial loads and shafts rotating at medium speeds, with the advantage that the insert bearing can be replaced without disassembling the complete housing.

To select the housing, start with the shaft diameter and the type of load: if there is axial load, verify that the insert can support it. Check the sealing according to the environment: in areas with water or fine dust, a tighter seal is advisable. During assembly, support the housing on a flat, rigid base, align the two halves before tightening the bolts and check that the shaft is parallel to the equipment. The insert is lubricated through the grease fitting; use the specified grease and do not mix different bases. Careful alignment extends bearing life and prevents vibration.

Regarding equivalences, Y-bearings with insert bearing are interchangeable between manufacturers if the shaft diameter, center height, bolt spacing and insert locking type match. DODGE GT/GTM series have counterparts in equivalent lines from other brands, but it is not advisable to rely only on the code: the housing dimensions and shaft locking system must be compared. If you need to replace an existing unit, send us a photo or the code engraved on the housing and we will indicate the compatible alternative.

MR Accesorios Industriales sells the DODGE brand in Buenos Aires, Argentina. If you have the series code, write to us on WhatsApp and we will quote you shortly. We can also advise you on the insert, sealing or lubrication suitable for your application.