Pillow block bearing DODGE P2B-GTH-10-E

DODGE P2B-GTH-10-E is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-GTH-10-E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GTH-E series Y-bearing insert pillow block is a mounted foot unit that combines a cast iron housing with an insert ball bearing, already lubricated and sealed. It is used to support rotating shafts in power transmission equipment, where the bearing needs to be aligned, fastened and protected in a single piece. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you to choose the correct code for your application.

The GTH-E series designation is read in blocks. The initial letters P and B indicate the housing type: foot with two fastening holes. The number that follows —05, 06, 07, 09, 10, 11, 12 or 100 in the examples— identifies the insert bearing size. The GTH block corresponds to the housing family and the -E suffix indicates the sealing variant. Thus, a P2B-GTH-06-E is a foot housing with size 06 insert, and a P2B-GTH-100-E is the largest size in the series.

These housings are seen in belt conveyors, bucket elevators, mixers, mills, screens and packaging lines. In Argentina they are common in food, cement, mining, paper and aggregate processing plants, where the environment has dust, humidity or frequent washing. The cast iron housing protects the insert and allows it to be fastened to the structure with two bolts, simplifying mounting and replacement in equipment that runs many hours per day.

To select the housing, start from the shaft diameter and the load type: radial, axial or combined. Check that the insert has the right sealing for the environment —grease retained and contaminants out— and that the housing allows the necessary self-aligning clearance. During mounting, rest the base on a flat, rigid surface, tighten the bolts in a cross pattern and check shaft alignment before start-up. The insert lubrication comes from the factory; subsequent regreasing depends on the working conditions.

Y-bearing insert pillow blocks are interchangeable between brands if the shaft diameter, center height, hole spacing and fastening type match. Series with equivalent sealing suffixes are usually interchangeable, but it is advisable to confirm the thread, hole diameter and load rating before replacing a unit. If you have doubts, send the old code and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the DODGE line in Buenos Aires, Argentina, with more than 80 years of experience in bearings, housings and power transmission. If you need a P2B-GTH for your equipment, write to us on WhatsApp with the code or model you are looking for and we will quote it promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.