Pillow block bearing DODGE P2B-GTEZ-35M-SHCR

DODGE P2B-GTEZ-35M-SHCR is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-GTEZ-35M-SHCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The GTEZ series pillow block with insert bearing is a mounted unit that combines a cast iron housing and a ball insert bearing, ready to be fixed to a flat base. It is used to guide and support rotating shafts in equipment where a compact, easy-to-align unit is required. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, with technical advice to select the correct size according to shaft diameter and operating conditions.

The GTEZ series designation is interpreted in blocks: the prefix P indicates pillow block, the number that follows —2 in the examples— defines the number of mounting holes in the base. Then comes B, which corresponds to the split or split-type housing. The code continues with the letters GTEZ, which identify the series and the sealing and lubrication system. The number before the M indicates the shaft diameter in millimeters or inches depending on the variant: the examples range from 20M to 50M. The suffix SHCR refers to the insert and sealing type. Understanding this structure allows you to order the exact replacement or a compatible alternative.

These pillow blocks are used in a wide variety of industries in Argentina. They are common in belt conveyors, bucket elevators, mills, mixers, centrifugal pumps and process equipment in food, chemical and petrochemical plants. They also appear in agricultural machinery, irrigation systems and material handling equipment. Their robust housing and insert bearing absorb radial loads and some axial thrust, with initial alignment that makes mounting on welded or cast structures easier. The GTEZ series is a common choice when a pillow block with good sealing and simple replacement is needed.

To select the correct pillow block, take into account the shaft diameter, the expected radial and axial load, and environmental conditions. SHCR sealing protects against dust and moisture, making it suitable for environments with particles or frequent washdown. Check the alignment between pillow blocks and the parallelism of the base to avoid stress on the insert. Lubrication must be the one specified by the manufacturer and renewed according to the duty cycle. Mounting is done by fixing the housing to the base with the corresponding bolts and then securing the insert to the shaft using the set screws or the locking system specific to the series.

Regarding equivalents, pillow blocks with insert bearings from different brands can be interchanged if the main dimensions match: shaft diameter, bolt hole spacing, center height and mounting type. The DODGE GTEZ series has counterparts in other commercial lines, but it is essential to verify the housing and insert dimensions before replacing. MR Accesorios Industriales can advise you on compatibility with other brands and models, without the exact nomenclature having to match. It is always advisable to compare drawings or actual measurements to ensure a correct fit.

If you need a GTEZ pillow block or a compatible alternative, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we will quote you promptly and indicate the option that best suits your equipment. We can also evaluate special applications and suggest the right insert or seal for your process. More than 80 years of experience in industrial distribution back our technical service in Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.