Pillow block bearing DODGE P2B-DLUEZ-104S-SHCR

DODGE P2B-DLUEZ-104S-SHCR is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-DLUEZ-104S-SHCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DLUEZ series Y-bearing housing with insert bearing is a pillow block mounted unit: the cast iron housing seats a ball bearing with an extended inner ring, which is secured to the shaft and allows the assembly to be aligned on the bedplate. It is used to support transmission shafts in equipment where a compact, self-aligning unit with simple mounting is required, with retained lubrication and protection against dust and moisture.

The DLUEZ series designation is read in blocks. In P2B-DLUEZ-104S-SHCR, the prefix P2B identifies the two-bolt split pillow block housing; DLUEZ names the housing family and the insert type; the number 104S indicates the shaft diameter in inches according to the series table, and the suffix SHCR refers to the sealing and retention configuration. When the code changes, the shaft diameter or the seal type changes, not the mounting method.

These housings appear in belt and roller conveyors, mixers, screens, bucket elevators, fans and process lines in food, chemical and aggregate plants. In Argentina they are found in sugar mills, meat processing plants, water treatment plants and mining facilities, where an environment loaded with dust or moisture demands a closed unit with extended maintenance intervals. They are also used in material handling equipment and agricultural machinery.

To select, start from the shaft diameter and the load type: the DLUEZ series is an insert type with set screws or collar, depending on the variant. Check the required sealing: SHCR indicates a seal designed for environments with fine dust and splashes. During mounting, seat the housing on a flat surface and align the holes before tightening; poor alignment shortens the life of the insert. Lubricate with grease compatible with the working temperature and check the radial clearance before start-up.

Cross-brand equivalences are resolved by mounting dimensions: distance between holes, height to shaft center, shaft diameter and fixing type. A housing from another brand with the same geometry can replace the original, but the sealing and load capacity must also be compared. If the code does not match, send the dimensions or the model to MR Accesorios Industriales via WhatsApp and we will indicate the compatible alternative.

MR Accesorios Industriales carries the DODGE brand and brings more than 80 years of experience in bearings, housings and power transmission. If you need the DLUEZ series Y-bearing housing or a variant with a different shaft diameter, write to us on WhatsApp with the code or the equipment dimensions and we will send you a quote shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.