Pillow block bearing DODGE P2B-DLEZ-25M-PCR

DODGE P2B-DLEZ-25M-PCR is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-DLEZ-25M-PCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE DLEZ series Y-bearing housed unit is a foot-mounted assembly that combines a ball bearing insert with a split or solid housing, depending on the model. It is used to support rotating shafts in power transmission equipment, where firm holding and correct alignment are required. MR Accesorios Industriales sells this line as an official brand and advises you on choosing the right variant for your application.

The DLEZ series designation is read in blocks. The prefix P2B indicates the housing type and its mounting configuration; DLEZ identifies the insert series, with sealing and locking features; the number that follows —20, 25, 35, 45 or 50— corresponds to the nominal shaft diameter in millimeters, and the suffix M indicates the metric system. The ending PCR distinguishes the type of insert-to-shaft locking. Thus, a P2B-DLEZ-25M-PCR is a foot-mounted housing with DLEZ insert for a 25 mm shaft, with PCR locking.

These housings are seen in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and industrial fans. In Argentina you find them in food plants, cement plants, tanneries, aggregate processing plants and packaging lines. The combination of a Y-bearing housing with insert simplifies assembly and allows small angular misalignments to be compensated, which is why it is common on transmission shafts with pulleys, sprockets or couplings.

To select the housing, start from the shaft diameter you need and the type of load: predominantly radial or with an axial component. Check the insert sealing according to the environment: dust, moisture or frequent washdowns require more robust seals. During assembly, ensure the base sits flat and the shaft is aligned with the rest of the line. Insert lubrication is permanent in many models, but it is advisable to check the seal condition and operating temperature. If the equipment vibrates, check the tightening of the locking screws.

Housed units with insert bearings are interchangeable between brands if the shaft diameter, center height, hole spacing and locking type match. DODGE, SKF, NTN, Timken and FYH offer equivalent lines, but each manufacturer has its own codes and suffixes. There is no universal table: equivalence is confirmed by comparing critical dimensions and the insert type. If you need to replace an existing housing, send us the code stamped on the part or the main dimensions and we will indicate the compatible alternative.

MR Accesorios Industriales sells the DODGE line and also manufactures split plummer block housings, ANSI chains and pulleys. If you are looking for a DLEZ series Y-bearing housed unit, send the full part number by WhatsApp —for example P2B-DLEZ-35M-PCR— and we will quote it promptly. If you cannot find the exact variant, write to us with the model or dimensions and we will help you solve it.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.