DODGE P2B-DLEZ-100-PCR pillow block bearing

DODGE P2B-DLEZ-100-PCR is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-DLEZ-100-PCR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE DLEZ series pillow block is a mounted unit that combines a split cast iron housing with a ball insert bearing. It is used to support rotating shafts in power transmission equipment, allowing the bearing to be aligned and secured without machining the housing. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in industrial distribution.

The DLEZ series designation is read in blocks: P indicates pillow block, B the split variant, DLEZ the insert type with its seals, and the three-digit number identifies the shaft diameter. For example, P2B-DLEZ-012-PCR corresponds to a split pillow block with DLEZ insert for a 12/16 inch shaft, while other part numbers cover other sizes. The PCR suffix indicates a specific sealing and locking configuration. The asterisks in some examples indicate variants within the same series.

These pillow blocks are used in conveyors, belts, elevators, mixers, mills and process equipment in food, chemical, cement and aggregate processing plants. In Argentina they are common in the oilseed, meatpacking and animal feed industries, where cleanliness and weather resistance are critical. Their split design facilitates shaft assembly and disassembly without dismantling the entire line, which reduces maintenance times on critical equipment.

To select the DLEZ pillow block, verify the shaft diameter and the type of load: radial, axial or combined. The insert sealing protects against dust and humidity; in environments with frequent washdowns, a configuration with an additional radial shaft seal is advisable. Mounting requires aligning the pillow block with the shaft and tightening the fastening bolts evenly to avoid deformation. Lubrication of the insert bearing is usually permanent, but under severe conditions it may require periodic replenishment according to the manufacturer.

DODGE DLEZ series pillow blocks are interchangeable with other brands of split pillow blocks with insert bearing, as long as the mounting dimensions, shaft diameter and locking type match. When requesting a quote, it is useful to compare the height to center, the bolt hole spacing and the insert locking system. MR Accesorios Industriales can indicate the compatible alternative if you have the original part number or the equipment dimensions.

If you need a DLEZ pillow block for your application, write to us on WhatsApp with the full part number or the shaft and housing dimensions. At MR Accesorios Industriales we will quote you promptly and advise you so that you choose the right variant. We also manufacture split pillow blocks to order if your equipment requires a special configuration.