Pillow block bearing DODGE P2B-DL-110L

DODGE P2B-DL-110L is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-DL-110L via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE DLM series pillow block is a mounted unit that combines a cast iron housing with a ball insert bearing, ready to bolt onto a flat base. It is used to support rotating shafts in equipment where alignment and sealing are already resolved at the factory. MR Accesorios Industriales sells this line as an official brand and advises you on choosing the correct part number for your application.

The DLM series designation is read in blocks: P indicates pillow block, B the split or two-bolt housing type, DL the sealing variant and L the locking of the insert onto the shaft. The middle number defines the shaft diameter. For example, P2B-DL-110L corresponds to a pillow block with a DLM series insert bearing for a 1.1/2 inch shaft. Suffixes change the sealing, the outer sleeve or the locking system, so it is best to verify the complete part number before requesting a quote.

These pillow blocks are used in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical and aggregate plants. In Argentina they are common in the oilseed, meatpacking and water treatment industries. The cast iron housing with a flat base allows mounting on steel profiles or concrete beds with two bolts, and the insert bearing tolerates minor misalignment without losing performance.

To select the pillow block, start with the shaft diameter and the load type: predominantly radial in most conveyors. Check the sealing: versions with a contact lip seal are for dusty or humid environments, while labyrinth seals are for higher speeds. During mounting, seat the base flat, tighten the bolts in a cross pattern and verify that the insert is locked onto the shaft with the corresponding locking system. Lubricate according to the duty cycle and check alignment with a straightedge or dial indicator.

As for equivalents, mounted pillow blocks are interchangeable between brands by shaft number and housing type, but the sealing, center height and locking system change. There is no universal table: each manufacturer uses different coding. If you have the original part number, send it; if not, provide the shaft dimensions and the distance between the base holes. At MR Accesorios Industriales we can point you to the compatible alternative within the DODGE line or the one that best fits your equipment.

To request a quote for your DODGE DLM series pillow block, message us on WhatsApp with the complete part number, for example P2B-DL-110L, or with the shaft and base dimensions. We will reply shortly with the option you need. If you are looking for a sealing or locking variant that is not listed, you can also ask about it: we can source it or offer you the equivalent.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.