Timing pulley DODGE P168-14M-115-J

DODGE P168-14M-115-J is a timing pulley reference, within Power transmission. Request a quote for P168-14M-115-J via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Dodge 14M series timing belt pulleys are power transmission components that work with timing belts to achieve an exact rotation ratio, without slipping. They are used when the process requires synchronization between shafts, such as in machine tools, packaging equipment or production lines. MR Accesorios Industriales supplies this Dodge line, a brand that MR carries, with more than 80 years of experience in the Argentine industrial market.

The designation of these pulleys is read in blocks. In P60-14M-170-J, the letter P identifies the timing pulley family; the number that follows, in this case 60, indicates the number of teeth; 14M corresponds to the belt pitch, and the final number, 170, refers to the pulley width. The final letter J indicates the type of hub or bushing. Thus, P64-14M-115-J and P72-14M-170-J share the 14M pitch but vary in pitch diameter and width. The 14M-115 and 14M-170 series are the two width variants available in this line.

These pulleys are used in industries where synchronization is critical: feeding of packaging lines, precision conveying, textile machines, printing and cutting equipment, and drives for pumps and compressors that require constant speed. In Argentina we see them in food, automotive and plastics plants, where maintenance seeks compatible replacements without stopping production. The 14M series covers a range of medium to high powers within timing belt transmission.

To select the correct pulley, three data points must be cross-referenced: number of teeth, pitch and belt width. The 14M pitch requires a belt of the same profile, and the width must match that of the pulley. The J hub defines the shaft fastening system; verify the shaft diameter and bushing type before mounting. Alignment between pulleys is key to avoid uneven tooth wear and noise. Adequate lubrication of the bushing and correct screw torque complete a reliable installation.

Dodge is a reference in power transmission, and its timing pulleys can often be interchanged with those of other manufacturers that use the same pitch and number of teeth. Interchangeability is not automatic: the tooth profile, width and hub system must be compared. If the original part number is not available, it can be replaced by a pulley with the same pitch and number of teeth, adjusting the bushing if necessary. MR Accesorios Industriales advises you to find the compatible equivalent.

If you need a Dodge 14M series timing pulley, send the complete part number by WhatsApp to MR Accesorios Industriales. With the model we will quote you promptly. If you cannot find the exact variant, write to us with the data of the original pulley and we will indicate the compatible alternative or manufacture it to measure.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.