DODGE NSTU-SCFS-012-SHFS take-up bearing

DODGE NSTU-SCFS-012-SHFS is a reference of take-up bearing, within Bearing housings. Request a quote for NSTU-SCFS-012-SHFS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE NSTU SCFS SHFS Y-bearing with insert is a mounted take-up bearing: a ball bearing unit with a spherical outer ring, housed in a support that allows tensioning and guiding chains, belts or bands. It is used where slight misalignment must be absorbed and the tension of a run must be maintained, such as conveyor take-ups, bucket elevators and chain drives in industrial plants in Buenos Aires, Argentina and the rest of the country.

The series designation is read in blocks. NSTU identifies the take-up mounted bearing line; SCFS corresponds to the housing type and its fastening configuration; SHFS defines the insert and the sealing. The middle number indicates the shaft diameter: that is why references such as NSTU-SCFS-012-SHFS, NSTU-SCFS-014-SHFS and NSTU-SCFS-015-SHFS for inch shafts coexist with NSTU-SCFS-100-SHFS, NSTU-SCFS-102-SHFS, NSTU-SCFS-103-SHFS, NSTU-SCFS-104-SHFS and NSTU-SCFS-105-SHFS for the equivalent metric sizes. The final suffix groups the sealing and insert variants, so two references with the same number may differ at that point.

In Argentine industry these take-up supports appear in belt and chain conveyors, bucket elevators, packaging lines, mills, food plants and aggregate processing plants. They are also found in material handling equipment and in drives where the take-up shaft works under moderate load and needs angular correction. Being mounted units, they simplify assembly: the housing is fastened to the frame and the insert already comes with its locking system on the shaft.

To select correctly, look at the shaft diameter and the type of shaft locking, the sealing according to the environment (dust, water, washdown) and the intended lubrication. During mounting, check the alignment of the housing with the run and the axial clearance needed so the insert works without preload. The unit is greased through the insert channel; it is best to do so with the equipment stopped and with the lubricant specified for the working temperature. An even tightening of the fastening bolts prevents deforming the housing.

Interchangeability between mounted bearing brands is resolved by dimensions and housing type, not by the commercial code: the same shaft diameter and the same configuration may exist in several lines. So if you need to replace a unit, send us the complete code, the shaft diameter and a photo of the housing. At MR Accesorios Industriales we quote the DODGE reference or point you to the alternative compatible with your application.

If your equipment uses a take-up support from the NSTU SCFS SHFS series, send the code by WhatsApp to MR Accesorios Industriales and we will quote it promptly. We can also advise you on sealing and lubrication according to the working environment. In Buenos Aires, Argentina, we support workshops and plants in the selection of mounted bearings and power transmission accessories.