Take-up bearing DODGE NSTU-GT-35M

DODGE NSTU-GT-35M is a take-up bearing reference, within Bearing housings. Request a quote for NSTU-GT-35M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE NSTU-GT series Y-bearing insert unit is a mounted unit ready to install, made up of an insert bearing with an extended inner ring and a cast iron housing that allows mounting on transmission shafts. It is used to guide and support rotating shafts in equipment where a compact and easy-to-align solution is required. Its take-up design makes it easy to adjust tension in belt or chain drives, and its robust construction makes it suitable for demanding industrial environments.

The NSTU-GT series designation is read in blocks: NSTU identifies the family of mounted units with insert bearing and take-up housing; GT corresponds to the mounted take-up bearing series according to the Dodge catalog; the number that follows —as in NSTU-GT-20M, NSTU-GT-25M or NSTU-GT-30M— indicates the shaft diameter in millimeters for which the inner ring bore is calibrated. The suffix M indicates the metric system. Thus, NSTU-GT-40M and NSTU-GT-50M correspond to 40 mm and 50 mm shafts respectively. This nomenclature allows you to quickly identify the right unit for each application.

These units are used in a wide variety of industries in Argentina: food plants, packaging lines, belt conveyors, mining equipment, flour mills, water treatment plants and ventilation systems, among others. Their main function is to support transmission shafts and allow the mounting of pulleys (sheaves), gears or sprockets. The take-up design of the GT series is especially useful in belt drives, where tension needs to be adjusted to prevent slipping and premature wear. They are also used in applications where the shaft must be supported at an intermediate point.

To correctly select an NSTU-GT unit, take into account the shaft diameter, the type of load (radial, axial or combined), the environmental conditions and the mounting method. Verify that the housing allows proper alignment and that the insert bearing has the appropriate sealing for the environment: single or double lip seals, with or without an additional seal. Lubrication is essential: follow the manufacturer's recommendations and make sure the bearing is properly lubricated before start-up. During mounting, avoid striking the inner ring and verify axial and radial clearance according to the specifications.

As for equivalents and interchangeability, mounted units with insert bearing are usually interchangeable between different manufacturers as long as the critical dimensions match: shaft diameter, housing height, distance between fastening holes and inner ring fastening type. However, not all part numbers are equivalent; it is important to verify tolerances and the seal type. At MR Accesorios Industriales we supply the DODGE brand and can advise you on compatibility with other brands. If you need to replace an existing unit, write to us on WhatsApp with the part number or the shaft dimensions and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the DODGE line of housings and insert bearings, including the NSTU-GT series in its different sizes. If you are looking for a specific variant, a split plummer block housing or a unit with particular characteristics, write to us on WhatsApp with the part number or model you need and we will quote it promptly. We can also advise you on selection and mounting so that your equipment runs reliably.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.