Flange bearing 2 holes DODGE LFT-SCEZ-30M-SHSS

DODGE LFT-SCEZ-30M-SHSS is a flange bearing 2 holes reference, within Bearing housings. Request a quote for LFT-SCEZ-30M-SHSS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange bracket with insert bearing from the SCEZ SHSS series is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed onto a flat surface using two bolts. It is used to support shafts in equipment where a compact, self-aligning and easily replaceable unit is required, such as conveyor belts, agitators, blowers and process machinery. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina.

The series designation is read in blocks. The initial letters identify the housing type: 2-bolt flange. Then comes the SCEZ series, which defines the insert bearing and its locking system, and the SHSS suffix, which indicates the sealing variant and the housing finish. The number following the hyphen is the nominal shaft diameter: that is why LFT-SCEZ-20M-SHSS, LFT-SCEZ-25M-SHSS, LFT-SCEZ-30M-SHSS and LFT-SCEZ-35M-SHSS cover shafts of 20, 25, 30 and 35 mm. The final M indicates the metric thread of the mounting holes.

These brackets are found in food and beverage plants, material handling, water treatment and packaging lines. Also in the field: screw conveyors, norias and mills. The advantage of the 2-bolt flange is that it allows mounting the shaft against a vertical or horizontal face with only two anchoring points, which is useful when space is limited or when the unit needs to be aligned after welding the structure. In Argentina they are found in new equipment and in replacement of imported machines.

To choose correctly, verify the shaft diameter and the bolt hole spacing of the flange. The insert of the SCEZ SHSS series comes with sealing that retains grease and blocks dust, suitable for environments with moderate dirt. The bearing is self-aligning within the housing, so it absorbs small misalignments. During mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify that the shaft turns freely. Lubrication is done through the insert channel; follow the interval according to the application and temperature.

Regarding interchangeability, 2-bolt flange brackets with insert bearing are available from several brands with standardized shaft and hole dimensions. Equivalence is not defined by diameter alone: the hole spacing, the center height and the insert locking type must be compared. If the original part number is not at hand, send us the flange dimensions and the shaft diameter, and we will indicate the compatible alternative from the DODGE line we supply.

MR Accesorios Industriales supplies the DODGE line in Buenos Aires, Argentina, with more than 80 years of experience in bearings and brackets. If you need to replace a unit, send the complete part number via WhatsApp, for example LFT-SCEZ-30M-SHSS, or the dimensions of your flange. We will quote it promptly and, if needed, advise you so that the mounting is aligned and correctly lubricated.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.