Flange bearing 2 holes DODGE LFT-SC-104S-NL

DODGE LFT-SC-104S-NL is a flange bearing 2 holes reference, within Bearing housings. Request a quote for LFT-SC-104S-NL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE LFT-SC housing is a 2-bolt flange mounted bearing unit with a ball insert, designed to secure rotating shafts to flat structures. It is used when the shaft must be perpendicular to the mounting surface and a compact, self-aligning, easy-to-replace unit is required. MR Accesorios Industriales supplies this line as an official brand, with technical advice to choose the correct configuration for the equipment and working environment.

The LFT-SC designation is read in parts: LFT indicates the 2-bolt flange housing type, SC identifies the ball insert bearing series, and the number that follows — as in LFT-SC-104S-NL — indicates the insert size. The suffix S corresponds to the sealing variant, and NL indicates that the unit is supplied without pre-lubrication, so the user can apply the appropriate grease at the time of mounting. Knowing these suffixes avoids confusion when ordering a replacement or an equivalent unit.

These housings are used in conveyors, belts, agitators, fans, pumps, mills and process equipment in food, chemical, cement and aggregate processing plants. In Argentina they are common in packaging lines, balanced feed plants and material handling systems where a robust flange mounting and a bearing that tolerates slight misalignment are required. The DODGE SC series is a common reference in industrial maintenance due to its availability and its compatibility with standard shafts.

To select the correct housing, take into account the shaft diameter, the type of load — radial, axial or combined — and the environmental conditions: humidity, dust, frequent washdowns or high temperatures. The S sealing protects against contaminants and lubricant loss; if the equipment operates with intensive washdowns, additional seals or covers should be evaluated. During mounting, verify that the support surface is flat and clean, align the mounting holes and tighten the screws evenly. Lubrication must be done with the grease recommended for the operating speed and temperature, without overfilling the cavity.

When looking for a replacement, interchangeability between brands is defined by the flange dimensions, shaft diameter and insert type, not only by the part number. A unit from another brand may be compatible if it matches in hole spacing, mounting diameter and center height. MR Accesorios Industriales can indicate the compatible alternative or, if you prefer, in-house manufacturing of split plummer block housings when the requirement is special. It is always advisable to validate the equivalence with the actual equipment measurements before replacing.

If you need a quote for an LFT-SC housing or a variant of the SC series, send the complete part number by WhatsApp to MR Accesorios Industriales. With the model, brand and a photo of the mounting, we will quote you promptly and indicate the option that best suits your application. We can also advise you on insert bearings, seals and complementary lubricants so that the replacement is resolved in a single inquiry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.