Flange bearing 2 holes DODGE LFT-DL-20M

DODGE LFT-DL-20M is a flange bearing 2 holes reference, within Bearing housings. Request a quote for LFT-DL-20M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LFT-DL housing with DODGE insert bearing is a 2-bolt flange mounted bearing unit from the D-Lok series. It is used to support rotating shafts on flat structures, with a compact mounting that allows the unit to be fastened from the front. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, and advises you on choosing the right variant for your application.

The LFT-DL designation identifies a 2-bolt flange housing with an insert bearing from the D-Lok series. The letters DL correspond to the D-Lok locking system, which locks the insert onto the shaft by means of an eccentric collar. The number that follows DL — as in LFT-DL-20M — indicates the nominal shaft diameter in millimeters. The M suffix indicates the metric variant. With that part number you can locate the exact unit you need.

These housings are used in conveyors, belts, elevators, mixers, blowers and process lines in general. In Argentina they appear in food, cement, paper, meatpacking and mining plants, where the 2-bolt flange simplifies mounting onto existing sheet metal or structures. They are also chosen for equipment where space is limited and a firm front fastening is required.

To select the housing, check the shaft diameter and the type of load: the D-Lok series accepts moderate radial and axial loads. Check that the flange seats properly and that the holes line up with the structure. The insert comes lubricated and sealed; nevertheless, in dusty or humid environments it is advisable to check the condition of the sealing and relubricate according to the duty cycle. Alignment between housings is key to avoiding stress on the bearing.

DODGE D-Lok series housings are interchangeable with other brands of 2-bolt flange mounted bearings that share the same shaft diameter and hole pattern. When requesting a quote, it is advisable to provide the full part number and, if possible, the shaft and flange dimensions. MR Accesorios Industriales will indicate the compatible alternative if you need to replace an existing unit.

If you have the LFT-DL part number or the equipment model, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. We can also advise you on the D-Lok series variant that best suits your shaft and operating conditions. With more than 80 years in the market, MR supplies Argentine industry with housings and bearings from leading brands.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.