DODGE LF-GT-30M flange bearing 3 holes

DODGE LF-GT-30M is a reference of flange bearing 3 holes, within Bearing housings. Request a quote for LF-GT-30M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE GT series Y-bearing insert flange unit is a 3-bolt flange mounted bearing, designed to fasten rotating shafts to flat structures with simple alignment and compact mounting. It is used when the shaft must be perpendicular to the mounting plane and the load combines radial with some axial. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, in industrial distribution.

The GT series designation is read in blocks: the letters LF identify the flange housing family, GT is the construction series, and the number with the final M indicates the shaft diameter for which the insert is machined. Thus, LF-GT-17M, LF-GT-20M, LF-GT-25M, LF-GT-30M and LF-GT-35M cover shafts of different sizes within the same flange geometry. That final M is the key reference for ordering the correct replacement: changing it means changing the bore diameter of the insert, not the housing.

These 3-bolt flange housings are mounted on equipment where the shaft works supported on sheet metal or cast iron: conveyor belts, mixers, blowers, exhausters, food machinery and packaging lines. In Argentina you will find them in grain plants, meat processing plants, tanneries and metalworking shops that need a bearing unit ready to bolt on, with the insert already mounted in the housing and sealed against dust and moisture.

To choose well, take into account the shaft diameter required by the application, the type of load (predominantly radial or combined) and the environmental conditions: if there is water, dust or frequent washdowns, an insert with reinforced sealing is advisable. During mounting, rest the flange on a flat, clean surface, tighten the three bolts in a cross pattern and check that the shaft turns without effort. Lubrication of the insert and careful alignment of the shaft with the flange extend the life of the assembly.

DODGE is a leading brand in mounted bearings and MR Accesorios Industriales sells it as part of its housing line. When replacing a unit, interchangeability between brands is defined by shaft diameter, flange type, number of bolts and mounting dimensions, not by the commercial part number. That is why it is advisable to compare those dimensions before substituting one unit for another from a different manufacturer.

If you need the DODGE GT series Y-bearing insert flange unit, send us the full part number via WhatsApp (for example LF-GT-25M) or the shaft diameter and flange arrangement. At MR Accesorios Industriales we will quote the reference and, if you are looking for a variant you do not see, we will indicate the compatible alternative. We are in Buenos Aires, Argentina, and we respond promptly.