Insert bearing DODGE INS-VSC-25M

DODGE INS-VSC-25M is a insert bearing reference, within Bearings. Request a quote for INS-VSC-25M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Dodge VSC series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split housings and wall units. It is used in equipment where radial loads and some axial thrust must be supported, with the possibility of aligning and dismounting without completely disassembling the shaft. MR Accesorios Industriales supplies this Dodge line for plants, workshops and maintenance in Buenos Aires, Argentina.

The VSC series designation is read by its base code and the suffix that indicates the shaft diameter. In the examples INS-VSC-17M, INS-VSC-20M or INS-VSC-25M, the central number refers to the millimeter size of the insert bore, and the final letter M identifies the version with extended inner ring and set screws. Thus, an INS-VSC-40M corresponds to an insert for a 40 mm shaft, ready to mount in the compatible housing of the same series.

These inserts are used in belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and aggregate plants. In Argentina they are common in agriculture, storage plants and the manufacturing industry, where maintenance prefers to replace the insert without changing the entire housing. The VSC series covers diameters from 17 mm to 50 mm, which allows standardizing several pieces of equipment with the same mounting criteria.

To select the insert, verify the shaft diameter, the housing type and the sealing required according to the environment. Mounting is done with the set screws on the extended inner ring, tightening evenly and verifying that the shaft is aligned with the housing. Factory lubrication is usually sufficient for the service life, but in dusty or humid environments it is advisable to check the sealing and relubricate if the design allows it.

Dodge VSC series inserts are interchangeable with other brands that use the same mounting standard and shaft dimensions, as long as the outer diameter, width and set screw location match. When requesting a quote, it is advisable to provide the complete insert code and, if possible, a photo of the housing and shaft to confirm equivalence. MR Accesorios Industriales will indicate the compatible alternative if the exact reference is not available.

If you need an insert for equipment that is down, send the code via WhatsApp to MR Accesorios Industriales. With the model and shaft size we will quote promptly and advise you on mounting and lubrication. We can also check the associated housing so that the assembly is aligned and without play.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.