Insert bearing DODGE INS-SXRH-30M

DODGE INS-SXRH-30M is a insert bearing reference, within Bearings. Request a quote for INS-SXRH-30M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Dodge SXRH series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall units. It is used when the insert needs to be replaced without changing the housing, or to assemble equipment with a split housing. MR Accesorios Industriales supplies this official brand line and advises you on choosing the correct part number for your application.

The SXRH series designation is read from the complete part number: for example, INS-SXRH-30M or INS-SXRH-45M. The letters SXRH identify the Dodge insert family for split plummer block housings; the number that follows indicates the shaft diameter in millimeters, and the final M distinguishes the sealing and locking variant. Thus, INS-SXRH-50M corresponds to an insert for a 50 mm shaft. By sending the complete part number via WhatsApp, we can quote the exact reference.

These inserts are found in belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and aggregate plants. Also in agricultural machinery and packaging lines. In Argentina, where dust and moisture punish assemblies, the insert with good sealing and simple replacement is a common maintenance solution. MR Accesorios Industriales supports plants throughout the country with this line.

To select the insert, verify the shaft diameter and the type of housing where it will be seated. Sealing is key: in dusty or wet environments, a variant with reinforced seal is advisable. During assembly, clean the seat, check that the shaft has no burrs and tighten the locking set screws with the appropriate wrench. Factory lubrication usually lasts for the service life, but under severe conditions you can relubricate if the insert has a lubrication passage. Alignment between housings prevents lateral loads.

Regarding equivalences, Dodge SXRH series inserts can be interchanged with other brands that use the same millimeter diameter nomenclature and similar outer ring configuration. There is no universal table: interchangeability depends on housing dimensions and the locking system. If you send us the original part number or the shaft and housing measurements, we will indicate the compatible alternative within what we supply.

If you need to replace a Dodge SXRH insert, send us the complete part number via WhatsApp: INS-SXRH-30M, INS-SXRH-55M or whichever applies. We will quote you promptly and, if you are looking for a variant that is not listed, write to us with the model or measurements and we will guide you. MR Accesorios Industriales works with this line so your equipment keeps running.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.