Insert bearing DODGE INS-SXRH-104S-E

DODGE INS-SXRH-104S-E is a insert bearing reference, within Bearings. Request a quote for INS-SXRH-104S-E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SXRH-E series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and mounted bearing units. It is used to transmit motion in equipment where the shaft rotates and needs support with alignment and sealing. MR Accesorios Industriales sells this line as an official brand, with technical advice to select the correct size according to the shaft diameter and the type of housing.

The SXRH-E series designation is read in parts: SXRH identifies the family of inserts with sealing and locking features, and the suffix -E distinguishes the execution variant. The complete code includes a number that indicates the shaft diameter, as in INS-SXRH-104S-E, where that numeric segment defines the size. To choose the correct insert, send us the complete code or the shaft diameter and the type of housing you are going to use.

These inserts are used in conveyors, belts, elevators, mixers, pumps, fans and agricultural or process machinery. In Argentina you will find them in food plants, cement plants, quarries, aggregate processing plants and agro-industrial facilities. The combination of insert bearing plus split plummer block housing is common where fast mounting on long shafts is needed and disassembly is possible without moving the entire assembly.

To select the insert, take into account the shaft diameter, the type of load (radial, axial or combined), the rotation speed and the environmental conditions. Sealing is key: in environments with dust, water or frequent washdowns, it is advisable to verify the type of radial shaft seal and the available protection. Mounting must be done with the shaft clean and free of burrs, tightening the housing screws evenly so as not to deform the outer ring. Correct lubrication and careful alignment extend the service life of the assembly.

Insert bearings from different brands are often interchangeable if the main dimensions match: shaft diameter, outer diameter, width and locking system. However, each manufacturer may vary the seal design, internal clearance or locking method. Therefore, before replacing one insert with another, it is advisable to compare the measurements and consult a specialist. At MR Accesorios Industriales we will indicate the alternative compatible with your equipment.

If you need a DODGE SXRH-E series insert bearing, write to us on WhatsApp with the code or model you are looking for. We will quote you shortly and advise you so that the replacement is the correct one. We can also help you identify the size if you send us the shaft and housing data.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.