Insert bearing DODGE INS-SXR-60M

DODGE INS-SXR-60M is a insert bearing reference, within Bearings. Request a quote for INS-SXR-60M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Dodge SXR series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall units. It is used when the insert needs to be replaced without changing the housing, or to assemble equipment with split housings. Its design allows the shaft to be secured with set screws and absorbs minor misalignments. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with more than 80 years of experience in bearings and power transmission.

The SXR series designation is read from the complete part number: for example, INS-SXR-17M corresponds to an SXR insert for a 17 mm shaft; INS-SXR-20M for 20 mm; and so on up to INS-SXR-50M for 50 mm. The final letter M indicates that the bore size is in millimeters. The prefix INS identifies the insert family. In the series part numbers, the middle number is the shaft diameter, not the bearing outer diameter. There is a single reference for each size.

These inserts are used in belt conveyors, bucket elevators, mixers, mills, packaging lines and process equipment in food, chemical and aggregate plants. In Argentina they are common in the oilseed, meatpacking and cement industries, where split plummer block housings allow the shaft to be removed without disassembling the entire line. They also appear in road machinery and material handling equipment. The SXR series covers the most common shaft diameters in these applications.

To select the insert, take into account the shaft diameter, the housing type and the required sealing. The SXR series mounts in split plummer block housings compatible with its outer diameter and width. Verify that the housing is clean and free of burrs, and that the set screws of the inner ring are tightened onto the shaft with the proper wrench. Factory lubrication is usually sufficient for normal conditions; in dusty or humid environments, choose the version with reinforced seals. Alignment between housings must be checked before tightening.

Dodge SXR series inserts are interchangeable with other brands that use the same shaft diameter nomenclature and housing dimensions. If the original part number is not available, it can be replaced by an insert with equivalent dimensions from another line, as long as the shaft diameter, overall width and locking system match. At MR Accesorios Industriales we will indicate the compatible alternative based on the part number you send us. The brand does not need to match: what matters is the size and the housing type.

If you need to replace an SXR insert, send us the complete part number by WhatsApp. For example, INS-SXR-25M or INS-SXR-40M. With that information we will quote it promptly and confirm the alternative if needed. We can also advise you on the split plummer block housing or the complete unit. MR Accesorios Industriales sells the Dodge brand in Buenos Aires, Argentina, and manufactures split plummer block housings, ANSI roller chains and pulleys to complete your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.