DODGE INS-SCMED-35M insert bearing

DODGE INS-SCMED-35M is a reference of insert bearing, within Bearings. Request a quote for INS-SCMED-35M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Dodge SCMED series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split housings and wall or pillow block units. Its design allows the shaft to be secured on the inner ring and the assembly to be housed in a split housing, which simplifies mounting and replacement in equipment where access is difficult. It is used in power transmission and in machinery that works with rotating shafts and combined loads.

The series designation is read in blocks: the letters identify the insert family and the number that follows indicates the shaft diameter for which the bore is machined, in millimeters. Thus, INS-SCMED-25M corresponds to a 25 mm shaft, INS-SCMED-35M to a 35 mm one and INS-SCMED-50M to a 50 mm one. The M ending confirms the metric measurement. With the complete code, the insert your equipment needs is identified without ambiguity.

In Argentina these inserts appear in belt conveyors, bucket elevators, mixers, mills, packaging belts and process lines in food, chemical and aggregate plants. They are also found in water treatment equipment, blowers and industrial fans, where the split housing makes maintenance easier without disassembling the entire assembly. They are common in applications with long shafts and several support points.

To select the insert, start from the shaft diameter and the type of housing where it will be mounted. Check the sealing: in environments with dust, water or frequent washdown, reinforced protection is advisable. Check the lubrication and internal clearance before mounting, and verify the alignment of the housing with the shaft to avoid stresses on the balls and raceway. A misaligned mounting shortens service life even if the bearing is the correct one.

Inserts of this type are interchanged between brands by series number and shaft size, but not all series share housing dimensions, inner ring width or mounting system. Before replacing one insert with another, compare the outer diameter, the width and the method of adjustment to the shaft. If the original code does not match, we will indicate the alternative compatible with your housing dimensions.

If you have the insert code or the housing model, send it by WhatsApp to MR Accesorios Industriales and we will quote you shortly. We can also help you identify the shaft size and mounting type if you send us a photo or the housing dimensions. At MR Accesorios Industriales we know the equipment used in Argentine industry.