DODGE INS-SC-75M-HT insert bearing
- Brand
- DODGE
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- SC
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE INS-SC-75M-HT is a reference of insert bearing, within Bearings. Request a quote for INS-SC-75M-HT via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DODGE SC series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and bearing units. It is used in equipment where radial loads and some axial thrust must be supported with flexible alignment. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you to choose the right size for your application.
The SC series designation is read in blocks: INS indicates that it is an insert, SC identifies the series, the number that follows corresponds to the shaft diameter in millimeters, and the suffixes M and HT indicate sealing and heat treatment variants. For example, INS-SC-30M-HT is an SC series insert for a 30 mm shaft with M sealing and HT treatment. If your part number does not appear among the examples, write to us on WhatsApp and we will quote it.
These inserts are mounted in split plummer block housings and bearing units used in conveyors, belts, elevators, mixers, mills and process equipment. In Argentina you find them in food, cement, mining and paper plants and in the field, where dust and moisture demand reliable sealing. The SC series is one of the most widespread for shafts from 17 to 50 mm, and combines ease of mounting with good radial load capacity.
To select the insert, take into account the shaft diameter, the type of load (radial, axial or combined), the operating speed and the environmental conditions. The M seal protects against dust and moisture; the HT treatment provides wear resistance. During mounting, verify the housing alignment, lubricate as applicable and tighten the fastening bolts with the right wrench. Poor alignment shortens the service life of the bearing and the housing.
DODGE SC series insert bearings are interchangeable with other brands that use the same nomenclature and dimensions. If you need to replace an insert from another brand, send us the part number or the shaft dimensions and we will tell you the compatible alternative. MR Accesorios Industriales sells DODGE and can advise you so that the replacement is direct, without modifications to the housing.
To request a quote for your DODGE SC series insert bearing, send the full part number on WhatsApp: for example INS-SC-25M-HT or INS-SC-40M-HT. If you do not have it at hand, indicate the shaft diameter and the housing type. At MR Accesorios Industriales we reply promptly with the quote and the alternative that best suits your equipment.
Dimensions
- Bore
- 75 mm
Frequently Asked Questions
- What does the SC abbreviation mean in this insert bearing?
- SC identifies the insert series within the DODGE line. The number that follows indicates the shaft diameter in millimeters, and the M and HT suffixes refer to the sealing type and the heat treatment. To interpret your exact part number, send it to us on WhatsApp.
- How do I know what insert size I need for my housing?
- You need the shaft diameter and the housing model. The SC series covers shafts from 17 to 50 mm. If you send us that data or the part number of the old bearing, we will quote the equivalent insert and confirm compatibility.
- Are DODGE SC series inserts compatible with other brands?
- Yes, in general they are interchangeable with other brands that use the same nomenclature and dimensions. To ensure compatibility, send us the part number of the original insert or the shaft dimensions and we will tell you the alternative that fits best.