Insert bearing DODGE INS-SC-40M-HT

DODGE INS-SC-40M-HT is a insert bearing reference, within Bearings. Request a quote for INS-SC-40M-HT via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SC series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split housings and bearing units. It is used in equipment where radial loads and some axial thrust must be supported with flexible alignment. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you on choosing the correct size for your application.

The SC series designation reads in blocks: INS indicates that it is an insert, SC identifies the series, the number that follows (17, 20, 25, 30, 35, 40, 45, 50) corresponds to the shaft diameter in millimeters, and the suffixes M and HT indicate sealing and heat treatment variants. For example, INS-SC-30M-HT is an SC series insert for a 30 mm shaft with M sealing and HT treatment. If your code does not appear among the examples, write to us via WhatsApp and we'll send you a quote.

These inserts are mounted in split housings and bearing units used in conveyors, belts, elevators, mixers, mills and process equipment. In Argentina you will find them in food, cement, mining and paper plants and in the field, where dust and moisture demand reliable sealing. The SC series is one of the most widespread for shafts from 17 to 50 mm, and combines ease of mounting with good radial load capacity.

To select the insert, take into account the shaft diameter, the type of load (radial, axial or combined), the operating speed and the environmental conditions. M sealing protects against dust and moisture; HT treatment provides wear resistance. During mounting, verify the alignment of the housing, lubricate as appropriate and tighten the set screws with the correct wrench. Poor alignment shortens the service life of the bearing and the housing.

DODGE SC series insert bearings are interchangeable with other brands that use the same nomenclature and dimensions. If you need to replace an insert from another brand, send us the code or the shaft dimensions and we will indicate the compatible alternative. MR Accesorios Industriales sells DODGE as an official brand and can advise you so that the replacement is direct, without modifications to the housing.

To get a quote for your DODGE SC series insert bearing, send the complete code via WhatsApp: for example INS-SC-25M-HT or INS-SC-40M-HT. If you don't have it on hand, indicate the shaft diameter and the housing type. At MR Accesorios Industriales we respond shortly with the quote and the alternative that best suits your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.