Insert bearing DODGE INS-SC-103-CR

DODGE INS-SC-103-CR is a insert bearing reference, within Bearings. Request a quote for INS-SC-103-CR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Dodge SC series insert bearing is a ball bearing with an extended inner ring and set screw locking system, designed to be mounted in split plummer block housings and wall or flange units. It is used for rotating shafts in power transmission equipment, where ease of mounting and dismounting is as important as load capacity. MR Accesorios Industriales supplies this line as an official brand in Buenos Aires, Argentina.

The SC series designation is read in blocks: INS indicates that it is an insert, SC identifies the series, the three-digit number defines the shaft diameter and CR indicates the sealing configuration. For example, INS-SC-012-CR corresponds to a 12 mm shaft, while INS-SC-100-CR and INS-SC-104-CR cover inch sizes. The CR suffixes group variants with a contact seal, designed to retain lubrication and block the entry of contaminants.

These inserts are mounted in split plummer block housings, flange units and split housings used in belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and aggregate plants. In Argentina they are common in packaging lines, water treatment plants and material handling systems where the bearing needs to be replaced without disassembling the entire shaft.

To select the correct insert, take into account the shaft diameter, the locking type and the sealing. The SC series is locked with set screws on the extended inner ring; the CR seal defines the protection against dust and moisture. During mounting, verify the alignment of the housing and the axial clearance, and lubricate with the grease recommended for the application. A misaligned mounting accelerates wear on the seal and the raceways.

Dodge SC series insert bearings are interchangeable with other brands that use the same insert nomenclature and shaft sizes. When requesting a quote, send the complete part number and the shaft measurements so we can offer you the appropriate equivalent. MR Accesorios Industriales advises you so that the replacement is direct and compatible with your equipment.

If you need an insert from the SC series, write to us on WhatsApp with the part number or model you are looking for. We'll quote it shortly and indicate the compatible alternative if necessary. With more than 80 years in the field, at MR Accesorios Industriales we resolve technical inquiries on bearings and power transmission for the entire Argentine industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.