DODGE INS-GT-112-CR insert bearing

DODGE INS-GT-112-CR is a reference of insert bearing, within Bearings. Request a quote for INS-GT-112-CR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE GT series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall units. It is used when the insert needs to be replaced without changing the entire housing, or to assemble equipment with split housings. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in bearings and power transmission.

The GT series designation is read in blocks: INS indicates it is an insert, GT is the series, the number that follows defines the bore diameter and CR indicates the sealing configuration. That is why codes such as INS-GT-04-CR, INS-GT-05-CR or INS-GT-012-CR coexist: the shaft size changes, not the type of insert. To choose, send us the complete code or the shaft diameter and we will quote the exact reference.

These inserts appear in conveying equipment, mills, mixers, belts and grain elevators, food plants and water treatment plants. In Argentina they are found in the oilseed, meatpacking and cement industries and in continuous process plants. The advantage of the insert is that it allows the worn bearing to be replaced while leaving the housing mounted on the machine, which simplifies maintenance on large or hard-to-access equipment.

To select correctly, take into account the shaft diameter, the type of housing where it is seated and the working environment. The GT series is mounted in split plummer block housings and units that accept inserts with an extended inner ring. The CR seal protects against dust and moisture, so it is advisable in applications with moderate contamination. During mounting, verify the alignment of the housing and lubricate according to the duty cycle; poor alignment shortens the life of the insert.

As for equivalences, inserts are identified by series and size, and each manufacturer uses its own nomenclature. There is no automatic conversion between brands: to replace a DODGE insert with another, you must compare shaft diameter, inner ring width, type of locking and sealing. If you send us the original code, at MR Accesorios Industriales we will indicate the compatible alternative within the line we sell.

If you need a DODGE GT series insert, send us the code on WhatsApp: INS-GT-04-CR, INS-GT-05-CR or whichever corresponds to your equipment. You can also ask us about other sizes in the series or about inserts for split plummer block housings. We will quote you promptly and advise you so that the replacement is the correct one.