Product page
Insert bearing DODGE INS-GT-104S-CR
- Manufacturer Part Number
- INS-GT-104S-CR
- Brand
- DODGEOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- GT
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE INS-GT-104S-CR is a insert bearing reference, within Bearings. Request a quote for INS-GT-104S-CR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DODGE GT series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings, flanged housings or take-up units. It is fixed to the shaft by means of set screws and allows the assembly to be aligned easily. It is a common replacement part in power transmission and conveying equipment that runs with metric or inch shafts, depending on the model.
The designation of the GT series is read in blocks: the letters identify the insert family and the number that follows defines the shaft diameter for which it is machined. The suffix S indicates the type of shaft fixing and CR indicates the contact lip seal, which protects against dust and splashes. An example of the series is INS-GT-104S-CR, where the numeric block orders the size within the line.
These inserts are used in belt conveyors, bucket elevators, mixers, mills, packaging belts and plant equipment in general. In the Argentine market they appear in the food, cement, chemical, refrigeration industries and in aggregate processing plants, where washdown and dust demand reliable sealing and replacement parts that are easy to obtain.
To choose the right insert, take into account the shaft diameter and tolerance, the type of fixing and the working environment. The CR seal is suitable in areas with humidity or particles; in clean, high-speed applications a simple seal may be enough. During mounting, clean the seat, check the alignment of the housing and tighten the set screws with the appropriate wrench. Lubricate with medium-consistency grease and check radial clearance periodically.
Inserts for mounted housings are interchanged between brands by shaft number and housing geometry, not by the complete part number. Before replacing, compare the shaft diameter, the inner ring width, the position of the mounting holes and the type of sealing. If the original part number does not match, MR Accesorios Industriales indicates the alternative compatible with those dimensions.
If you need to replace a GT insert or look for an equivalent variant, send by WhatsApp the part number shown on the part or the housing model. With that data we will quote the bearing or indicate the alternative that best fits your equipment, with a reply shortly.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Número de producto
- 129830
- Eje o agujero
- 1-1/4 in
Frequently Asked Questions
- What does the CR suffix mean on a GT insert?
- The CR suffix identifies the contact lip seal, which closes the passage of dust and humidity toward the raceways. It is the recommended option in dirty environments or with frequent washdown, such as food and aggregate plants.
- How do I know what insert size I need?
- Measure the shaft diameter where the inner ring rests and the seat width in the housing. With those two dimensions and the part number engraved on the part, we will quote the corresponding GT insert or its compatible equivalent.
- Can it be replaced by an insert from another brand?
- Yes, as long as the shaft diameter, the inner ring width, the position of the set screws and the type of sealing match. The part number does not need to be identical: send us the dimensions and we will indicate the alternative that fits.