DODGE INS-ER-DL-015 insert bearing

DODGE INS-ER-DL-015 is a reference of insert bearing, within Bearings. Request a quote for INS-ER-DL-015 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE ER-DL series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and bearing units. It is used to support rotating shafts in equipment where mounting and dismounting must be simple, without dismantling the entire line. MR Accesorios Industriales sells this line, in industrial distribution in Buenos Aires, Argentina.

The ER-DL series designation is made up of the prefix INS, which identifies the insert, followed by ER-DL and a three-digit number that defines the shaft diameter. For example, INS-ER-DL-012 corresponds to a 12 mm shaft, while INS-ER-DL-100 and INS-ER-DL-104 cover larger sizes within the same series. The DL suffix indicates the sealing configuration and the type of inner ring locking, which in this series is done with set screws. Knowing the complete part number avoids confusion when ordering the replacement.

These inserts are found in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. In Argentina, they are common in the oilseed industry, in balanced feed plants and in packaging lines, where the environment often has dust, moisture or frequent washdowns. The combination with split plummer block housings allows the bearing to be aligned and replaced without moving the shaft or the structure.

To select the insert, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The ER-DL series comes with seals that retain grease and block the entry of contaminants; if the equipment operates with pressure washdowns, it is advisable to check the condition of the seals and renew the lubrication according to the maintenance plan. When mounting, clean the shaft seat, check that the set screws are properly tightened on the shaft and check the alignment with the housing to avoid parasitic stresses.

DODGE insert bearings are interchangeable with other brands that use the same series nomenclature and dimensions. It can be replaced by an equivalent insert from another brand, provided that the shaft diameter, the inner ring width and the locking type match. At MR Accesorios Industriales we will indicate the compatible alternative or, if necessary, we will quote it to measure. Send us the part number or model by WhatsApp and we will quote it shortly.