Insert bearing DODGE INS-DLM-211

DODGE INS-DLM-211 is a insert bearing reference, within Bearings. Request a quote for INS-DLM-211 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE D-Lok series insert bearing is a ball bearing with an extended inner ring and a cam locking system, designed to be mounted in split plummer block housings and bearing units. It is used in equipment that requires firm and simple securing onto the shaft, with the possibility of dismounting without damaging the component. MR Accesorios Industriales supplies this line for plants and workshops in Buenos Aires and the rest of the country.

The D-Lok series designation is organized with the prefix INS-DLM followed by a three-digit number. That number identifies the bore size and the locking type: for example, the codes INS-DLM-100, INS-DLM-103 and INS-DLM-107 correspond to different sizes within the same family. The numeric suffix does not indicate the diameter in millimeters directly, but refers to the size table of the series. To choose the correct bearing, send us the complete code or the dimensions of the shaft and the housing where it is mounted.

These inserts are used in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in general. In Argentine industry they appear in food, cement, paper, chemical plants and in the agro-industrial sector, where mounting in split plummer block housings makes maintenance and replacement easier without dismantling the entire equipment. They are also used in packaging machines and filling lines that require smooth rotation and low friction.

To select the insert, take into account the shaft diameter, the type of load —radial, axial or combined— and the environmental conditions: presence of dust, moisture or frequent washdowns. The D-Lok series is secured to the shaft by means of a cam that locks the inner ring; verify that the shaft surface is clean and free of burrs before mounting. Proper lubrication and sealing of the housing are key to extending service life. If the equipment operates with misalignment, choose housings that allow it to be compensated.

Regarding equivalents, insert bearings are identified by their shaft size and their locking system. Brands such as SKF, NTN, Timken or FYH offer equivalent lines, but each manufacturer uses its own nomenclature. There is no universal conversion: to replace a DODGE D-Lok with another brand, you must compare shaft diameter, inner ring width, locking type and sealing configuration. At MR Accesorios Industriales we indicate the compatible alternative if you send us the original code.

If you need to replace a DODGE D-Lok series insert bearing, write to us on WhatsApp with the INS-DLM code shown on the plate or on the old component. We will quote you promptly and, if you are looking for a variant that does not appear in the list, we will handle it with the exact model you indicate. MR Accesorios Industriales works with leading brands and in-house manufacturing to cover industrial maintenance needs in Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.