DODGE INS-DLH-107-E insert bearing

DODGE INS-DLH-107-E is a reference of insert bearing, within Bearings. Request a quote for INS-DLH-107-E via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE D-Lok series insert bearing is a ball bearing with an extended inner ring and eccentric collar locking system, designed to be mounted in split plummer block housings and wall or floor units. It is used where a rotating shaft needs to be supported with simple alignment and quick disassembly, in equipment operating under moderate load and normal plant speeds. MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The D-Lok series designation is read in blocks: the letters INS identify the insert, DLH corresponds to the D-Lok family with extended inner ring, and the number that follows indicates the shaft size within the series. The suffix E indicates the sealing variant. That is why references such as INS-DLH-102-E, INS-DLH-104-E or INS-DLH-203-E coexist: the number changes, the shaft size changes, but the mounting and locking concept is the same throughout the series.

These inserts appear in belt conveyors, bucket elevators, mixers, screens, fans and process lines in food, chemical and aggregate plants. In Argentina they are found in equipment where maintenance is done during scheduled shutdowns and the bearing needs to be replaced without disassembling the entire housing. They are also used in agricultural machinery and industrial washing systems, where sealing and resistance to contamination make the difference.

To choose correctly, first look at the shaft diameter and the type of housing where the insert is seated. The D-Lok system locks the inner ring to the shaft by means of an eccentric collar and a lock washer, so mounting requires thoroughly cleaning the seat, checking that the shaft has no burrs and tightening the collar in the direction of rotation. Check the sealing: in dusty or wet environments, the variant with reinforced lip is preferable. Correct lubrication and careful alignment of the housing extend the life of the assembly.

As for interchangeability, inserts of this type are compared between brands by shaft size, inner ring width and locking system, not by the commercial code. A D-Lok insert can replace another of similar construction as long as those three variables and the housing seat match. If you have doubts, send us the old code and the shaft dimensions: at MR Accesorios Industriales we will indicate the compatible alternative.

To request a quote, send us the complete insert code by WhatsApp, for example INS-DLH-107-E, or directly the shaft diameter and a photo of the housing. With that we will send you the corresponding DODGE reference and the equivalent options. We serve workshops, plants and distributors throughout the country from Buenos Aires, Argentina.