Insert bearing DODGE INS-DLH-104S-E

DODGE INS-DLH-104S-E is a insert bearing reference, within Bearings. Request a quote for INS-DLH-104S-E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE D-Lok insert bearing is a ball bearing with extended inner ring and eccentric collar locking system, designed to be mounted in split or solid housings. It is used in rotating equipment where a compact unit is required, easy to mount and dismount, with good radial load capacity and alignment. MR Accesorios Industriales supplies this line as an official brand for plants, workshops and industrial maintenance in Buenos Aires, Argentina.

The D-Lok series designation is read in blocks: the initial letters identify the insert family, the three-digit number indicates the bore diameter size and the suffix S indicates the sealing configuration. For example, INS-DLH-104S-E corresponds to a size 104 D-Lok insert with single sealing. The suffix E distinguishes a construction variant within the same series. With the complete part number, the insert you need is identified unambiguously.

These inserts are used in belt conveyors, bucket elevators, mixers, fans, centrifugal pumps, packaging lines and process equipment in general. In Argentina they are found in food, cement, chemical, paper and agro-industrial plants, where maintenance is done with equipment running and replacement speed is a priority. They are also used in low and medium power machines operating with moderate radial load and usual electric motor speeds.

To select the insert, verify the shaft diameter and the type of housing where it is seated. The D-Lok system locks the inner ring to the shaft by means of a collar and screw, which simplifies mounting and dismounting. Check the condition of the sealing: the suffix S defines the protection against dust and moisture, key in environments with particles. Lubricate with grease compatible with the working temperature and check the housing alignment to avoid parasitic axial loads that shorten bearing life.

Regarding interchangeability, DODGE D-Lok inserts can be replaced by equivalent units from other brands that share the same shaft diameter, the same locking type and the same sealing configuration. Equivalence is not defined only by the size number: the inner ring width, the collar position and the sealing must be compared. If you have doubts, send us the original insert part number and we will indicate the compatible alternative.

To request a quote for your DODGE D-Lok insert bearing, write to us on WhatsApp with the complete part number, for example INS-DLH-104S-E, or with the model of the housing where it is mounted. At MR Accesorios Industriales we will quote you promptly and, if you need a specific variant, we will handle it with the part number you provide. More than 80 years supporting industrial maintenance in Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.