Piloted flange bearing DODGE FC-SXV-200L

DODGE FC-SXV-200L is a piloted flange bearing reference, within Bearing housings. Request a quote for FC-SXV-200L via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The FC-SXV housing from DODGE is a piloted flange mounted bearing with an insert bearing, designed for shafts that need support and alignment on one mounting face. The piloted flange centers the assembly in the housing and the holes allow it to be secured with bolts. It is used in equipment where the shaft must be perpendicular to the mounting surface, with built-in lubrication and sealing for dusty or humid environments.

The FC-SXV designation is read in parts: FC indicates the piloted flange configuration, SXV identifies the insert bearing series and the number that follows — as in FC-SXV-200L — indicates the shaft size. The L suffix corresponds to the sealing or locking variant of the insert. To order the correct replacement, provide the complete code shown on the nameplate or on the old housing.

These housings are seen in belt conveyors, mixers, bucket elevators, fans and process lines in food, chemical and aggregate plants. In Argentina they are common in equipment that operates with dust, frequent washing or moderate vibration, where a robust support with simple mounting on sheet metal or welded structure is required.

To choose correctly, look at the shaft diameter, the insert locking type (set screw or eccentric) and the sealing: versions with contact lip seal perform better with fine dirt, while single lip versions are sufficient for dry environments. When mounting, seat the flange flat, tighten the bolts in a cross pattern and verify that the shaft turns without effort. Lubricate with lithium grease according to the duty cycle and check alignment with a straightedge or dial indicator.

Regarding interchangeability, piloted flange housings with insert are available from several brands with standardized dimensions, but the sealing, locking system and load capacity vary. Do not replace with another code just because the diameter matches: compare the flange height, the pilot diameter and the hole spacing. If in doubt, send us the measurements or the equipment code and we will indicate the compatible alternative.

MR Accesorios Industriales sells the DODGE line and will quote the FC-SXV housing you need. Write to us on WhatsApp with the complete code or the shaft and flange measurements, and we will respond promptly with the correct reference.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.