DODGE FC-SXV-104S piloted flange bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SXV
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE FC-SXV-104S is a reference of piloted flange bearing, within Bearing housings. Request a quote for FC-SXV-104S via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DODGE FC-SXV housing is a piloted flange mounted bearing with an insert bearing, designed to secure rotating shafts to metal structures simply and robustly. Its flange centers in the housing and is bolted down, which simplifies mounting and alignment in equipment where the shaft must remain perpendicular to the mounting surface. It is a common solution in low and medium-demand transmissions, with simple maintenance and fast replacement.
The SXV series designation is read in blocks: the letters identify the housing family and the mounting type, and the numbers after the hyphen indicate the size of the insert bearing. In the example FC-SXV-104S, the numeric code defines the insert size and the final letter indicates a sealing or mounting configuration variant. To choose the correct replacement, send us the complete code shown on the housing or on the equipment nameplate.
These housings are used in conveyors, belts, elevators, mixers, blowers and process lines in food, chemical, cement and aggregate processing plants. In Argentina they are common in material handling equipment and in machines operating with horizontal shafts supported on sheet metal or profile structures. The piloted flange allows mounting on machined faces and keeps the shaft centered without additional parts.
To select correctly, consider the shaft diameter, the load type and the direction of the forces. The piloted flange works best when the load is mainly radial and the housing is machined. Check the insert sealing: in dusty or humid environments, additional protection is recommended. During mounting, clean the seat, verify that the flange sits flat and tighten the bolts in a cross pattern. Lubricate the insert according to the operating regime and check shaft alignment to avoid parasitic loads.
Flange mounted bearings are available from several brands with their own nomenclatures. Equivalences are established by shaft dimensions, flange diameter, hole spacing and insert type, not by the commercial code. It can be replaced by another with the same geometry and capacity. MR Accesorios Industriales will indicate the compatible alternative based on the code or the assembly dimensions.
To proceed with the quote, send us the complete housing code via WhatsApp, a photo of the part and, if possible, the shaft diameter. With that data we will quote the DODGE FC-SXV and advise you on mounting. MR Accesorios Industriales sells DODGE and responds promptly.
Dimensions
- Bore
- 1-1/4 in
Frequently Asked Questions
- How do I identify the FC-SXV housing I need?
- Look for the code engraved on the housing or on the equipment nameplate. The number after SXV indicates the insert size and the final letter, the sealing variant. If you cannot find it, measure the shaft diameter and the hole spacing of the flange.
- Can it be replaced by another brand?
- Yes, if the mounting dimensions match: shaft diameter, flange diameter, hole spacing and insert type. Interchangeability is defined by geometry and capacity, not by the code. Send us the measurements and we will indicate the compatible alternative.
- What care does mounting require?
- Clean the flange seat, verify that it sits flat and tighten the bolts in a cross pattern. Check shaft alignment and lubricate the insert according to the operating regime. In dusty or humid environments, add additional sealing protection.