DODGE FC-SXR-40M piloted flange bearing

DODGE FC-SXR-40M is a reference of piloted flange bearing, within Bearing housings. Request a quote for FC-SXR-40M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SXR series piloted flange bearing housing is a mounted bearing with a ball insert, designed to be fastened to a flat face by means of a circular flange. It is used to guide shafts in equipment where the assembly must rest on a surface and be centered by the pilot. MR Accesorios Industriales sells this line.

The SXR series designation is read from its base code and the shaft diameter: for example, FC-SXR-30M corresponds to a piloted flange bearing housing for a 30 mm shaft. The letters SXR identify the family of flanged insert bearings, and the final number indicates the nominal shaft size in millimeters. The codes in the series cover different shaft sizes, always with the same mounting configuration.

These bearing housings are used in conveyors, mixers, fans, pumps and process lines where the shaft must be perpendicular to the mounting flange. In Argentine industry they appear in food, cement, paper and aggregate processing plants, among others. Their piloted flange format allows the assembly to be aligned with the machining of the equipment and simplifies replacement of the insert.

To select the bearing housing, check the shaft diameter and the type of fastening required. The ball insert tolerates slight misalignment, but it is advisable to check the flatness of the mounting surface and the tightening of the flange bolts. Lubrication and sealing of the insert influence service life: in dusty or humid environments, choose the appropriate protection and follow the manufacturer's maintenance recommendations.

Flanged mounted bearings are available from different brands with their own nomenclatures. Interchangeability depends on the flange dimensions, the shaft diameter and the type of insert fastening. When requesting a quote, provide the complete housing code and the shaft dimensions so we can offer you the equivalent alternative among the brands we sell.

If you need a piloted flange bearing housing for your equipment, write to us on WhatsApp with the code FC-SXR and the shaft diameter you use. At MR Accesorios Industriales we will quote you promptly and tell you the option that best suits your application.