Piloted flange bearing DODGE FC-SXR-207

DODGE FC-SXR-207 is a piloted flange bearing reference, within Bearing housings. Request a quote for FC-SXR-207 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE FC-SXR housing is a piloted flange mounted bearing with insert bearing, designed to mount on sheet metal or cast iron and center the shaft precisely. The piloted flange ensures alignment in the housing and distributes the load across the structure. It is used in equipment where the shaft must remain perpendicular to the mounting face, with integrated lubrication and sealing. MR Accesorios Industriales sells this line as an official brand.

The FC-SXR designation is read in parts: FC indicates the piloted flange housing, SXR identifies the insert bearing series, and the final number defines the shaft diameter. In the series examples, FC-SXR-101 and FC-SXR-102 correspond to the smallest sizes, while FC-SXR-107 and FC-SXR-108 cover the largest shafts. The numeric suffix does not change the mounting type: it only adjusts the bore size and load capacity. To choose, send the complete code and the shaft size.

These housings appear in belt conveyors, bucket elevators, mixers, blowers and process lines in food, chemical and aggregate plants. In Argentina they are seen in milling equipment, screens and norias, where the piloted flange simplifies mounting on sheet metal frames. They are also used in fans and low- and medium-power centrifugal pumps. The SXR series with insert bearing solves shafts that need self-alignment and sealing against dust or moisture.

To select properly, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The piloted flange requires a machined housing with a good fit so the pilot centers; if the sheet metal is thin, it is advisable to reinforce the mounting. The insert seal defines the protection: for dusty or wet environments, choose the version with the appropriate seal. Lubrication is done through the insert and must be renewed according to the duty cycle. Check alignment and tightening of the flange bolts before start-up.

Regarding equivalences, piloted flange housings with insert bearing are interchanged between brands by shaft size, flange type and sealing configuration, not by the commercial code. An FC-SXR can be replaced by a housing from another manufacturer with the same shaft size, same pilot diameter and same hole spacing. It is not enough for the shaft number to match: the mounting drawing must be compared. If you need an alternative, send us the dimensions or the code and we will indicate the compatible option.

MR Accesorios Industriales sells the DODGE line and quotes the housing you need. If you have the FC-SXR code or the shaft size, write to us on WhatsApp and we will send you the quote shortly. We can also look at alternatives within the same family if the mounting allows it. With more than 80 years in the industry, at MR Accesorios Industriales we resolve technical inquiries on housings and insert bearings so your equipment keeps running.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.