Piloted flange bearing DODGE FC-SCMED-75M

DODGE FC-SCMED-75M is a piloted flange bearing reference, within Bearing housings. Request a quote for FC-SCMED-75M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE FC-SCMED bracket is a piloted flange mounted bearing: the unit combines a ball insert bearing with a flange housing that centers in the bore by means of a pilot, ensuring alignment and rigidity in the assembly. It is used to support rotating shafts in equipment where mounting is done on a machined face, with the advantages of a sealed unit ready to install. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The series designation is read in blocks: the letters FC identify the piloted flange configuration, SCMED defines the insert bearing series and the number that follows — as in FC-SCMED-25M or FC-SCMED-50M — corresponds to the shaft diameter for which the insert is machined. The final suffix M distinguishes the series variant. With the complete code, such as FC-SCMED-35M or FC-SCMED-65M, the unit your equipment needs is unambiguously identified.

These units appear in belt conveyors, bucket elevators, mixers, blowers and process lines in food, chemical and aggregate plants. In Argentina they are seen in milling equipment, screens and conveyor belts, where the piloted flange allows mounting on sheet metal or cast iron with a centering fit and dismounting the assembly without completely disassembling the shaft. The housing protects the insert in environments with dust or moderate humidity.

To properly select the unit, take into account the shaft diameter, the insert locking type — set screw or eccentric — and the sealing required by the environment. The piloted flange must seat on a flat face perpendicular to the shaft; poor alignment shortens bearing life. Lubrication comes from the factory in the insert, and in service it is recommended to check the seal condition and relubricate according to working conditions. If in doubt, send us the code and we will indicate the compatible alternative.

Regarding interchangeability, piloted flange units from different brands usually share standardized mounting dimensions, but the insert locking system and sealing vary. Therefore it is advisable to compare the complete code and the flange dimensions before replacing one unit with another. At MR Accesorios Industriales we advise you to find the right equivalent within the DODGE line or other available alternatives.

If you need to replace an FC-SCMED bracket, write to us on WhatsApp with the exact code — for example FC-SCMED-30M or FC-SCMED-45M — and we will quote it shortly. We can also help you identify the unit from the shaft and flange dimensions if the original code is no longer legible.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.