Piloted flange bearing DODGE FC-SCM-111

DODGE FC-SCM-111 is a piloted flange bearing reference, within Bearing housings. Request a quote for FC-SCM-111 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE FC-SCM series Y-bearing with insert is a piloted flange mounted bearing unit: the unit combines an insert ball bearing with a flange housing that centers in the housing seat by means of a pilot. It is used to support rotating shafts in equipment where the flange is fixed to a wall or bedplate and the pilot ensures alignment. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina.

The FC-SCM-# designation is read in parts: FC indicates the piloted flange configuration, SC corresponds to the insert bearing series and SCM to the housing variant. The final number identifies the shaft diameter: for example, FC-SCM-100 and FC-SCM-103 are small sizes, while FC-SCM-200 corresponds to a larger shaft diameter. Each part number groups the insert bearing and the flange as a ready-to-mount assembly.

These bearing units are used in conveyors, mixers, blowers, centrifugal pumps and process equipment where the shaft must be supported on a fixed flange. In Argentina they are found in food, chemical and cement plants and in packaging lines, where the piloted flange simplifies mounting and replacement. The cast iron housing and the ball insert tolerate minor misalignment and moderate radial loads.

To select the bearing unit, take into account the shaft diameter, the type of load and the environmental conditions. The insert seal defines the protection against dust and moisture: choose the appropriate version if there are frequent washdowns. The flange pilot must seat clean and free of burrs to avoid losing concentricity. Lubricate the insert according to the duty cycle and check shaft alignment before tightening the bolts.

Cross-brand equivalences are resolved by shaft diameter and flange configuration, not by the commercial part number. A bearing unit from another brand with the same shaft size and flange type can be interchanged, but check the pilot diameter and the hole spacing. MR Accesorios Industriales will indicate the compatible alternative if the original part number is not available.

If you need a DODGE FC-SCM series Y-bearing with insert, send us the part number on WhatsApp. We will quote you promptly and advise you so that the mounting is correct.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.