Piloted flange bearing DODGE FC-DLM-307

DODGE FC-DLM-307 is a piloted flange bearing reference, within Bearing housings. Request a quote for FC-DLM-307 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The FC-DLM housing is a piloted flange mounted bearing from the DODGE DLM series. It consists of a cast iron housing with a circular flange and a ball insert bearing, which is secured to the shaft with set screws. The pilot centers the assembly in the machined bore of the equipment, which simplifies alignment and improves concentricity. It is used in conveyors, agitators, blowers and process equipment where a compact and robust front mounting is required.

The FC-DLM designation is read in parts: FC indicates the piloted flange configuration, DLM identifies the housing and insert series, and the final number indicates the size. For example, FC-DLM-100, FC-DLM-103 and FC-DLM-107 correspond to different sizes within the same family. The numeric suffixes do not change the mounting type: they only define the shaft diameter and the flange dimensions. To choose the correct part number, the most practical approach is to start from the shaft diameter and the hole pattern of the equipment.

These housings appear in food, beverage, cement and aggregate processing plants, especially in belt conveyors and screw conveyors. They are also found in mixers, centrifugal fans and process pumps. In Argentina, they are common in packaging lines, mills and grain handling equipment, where the environment usually has dust, humidity or frequent washdowns. The piloted flange allows them to be mounted on sheet metal or cast iron with a more precise fit than a conventional pillow block.

To select, verify the shaft diameter, the distance between flange holes and the pilot diameter. The insert usually comes with a contact seal that retains grease and blocks dust; if the equipment works with water or pressure washing, additional protection is advisable. Lubrication is with general-purpose lithium grease, applied without overfilling. During mounting, seat the pilot in the machined housing, tighten the flange bolts in a cross pattern and secure the insert to the shaft with the set screws, checking that the shaft turns freely and without axial play.

Mounted housings are interchanged between brands by shaft number and flange configuration, not by the manufacturer's part number. A DODGE FC-DLM can be replaced by an equivalent housing from another brand if the shaft diameter, pilot and hole pattern match. Series with the same letter usually share mounting dimensions, but each case should be confirmed with the technical data sheet. If you need an alternative, at MR Accesorios Industriales we can indicate the compatible option.

MR Accesorios Industriales sells DODGE as an official brand and has more than 80 years of experience in industrial distribution. If you have the part number FC-DLM-100, FC-DLM-111 or any other in the series, send it by WhatsApp and we will quote it promptly. We can also advise you on sealing, lubrication and mounting according to the application. We are in Buenos Aires, Argentina, and we handle technical inquiries from all over the country.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.