Piloted flange bearing DODGE FC-DL-110L

DODGE FC-DL-110L is a piloted flange bearing reference, within Bearing housings. Request a quote for FC-DL-110L via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE DL series Y-bearing unit is a piloted flange mounted bearing, designed to guide rotating shafts in equipment where mounting is done on a flat face. The flange centers the assembly and the mounting holes secure it to the frame. It is used in conveyors, agitators, blowers and process machinery, with the advantage that the insert can be replaced without disassembling the housing. MR Accesorios Industriales supplies it in Buenos Aires, Argentina.

The DL series designation is read in blocks: the initial letters indicate the type of housing and the nominal shaft diameter is expressed in hundredths of an inch. For example, FC-DL-110L corresponds to a piloted flange housing for a 1 1/8 inch shaft. The suffix L indicates the insert locking version. Knowing that logic allows you to order the correct spare part without relying on old catalogues.

These housings are seen in belt and screw conveyors, mixers, centrifugal fans, pumps and packaging lines. In food, chemical and aggregate plants in Argentina they withstand dust, humidity and frequent washdowns. The piloted flange simplifies mounting on sheet metal or cast iron and maintains shaft alignment, something critical in equipment where misalignment accelerates insert wear.

To select correctly, look at the shaft diameter, the type of locking and the insert sealing. In dusty or wet environments, a lip or double lip seal is advisable; in high temperature areas, a suitable grease. When mounting, rest the flange on a clean, flat surface, tighten the screws in a cross pattern and check that the shaft turns without effort. Periodic lubrication and careful alignment extend the life of the assembly.

Piloted flange mounted bearings are available from several brands with their own nomenclatures. Interchangeability depends on the shaft diameter, the hole spacing and the type of insert locking. If the original part number is not available, it can be replaced by an equivalent from another brand with the same critical dimensions. At MR Accesorios Industriales we tell you the compatible alternative.

If you need the DODGE DL series Y-bearing unit, write to us on WhatsApp with the part number FC-DL-110L or with the shaft and flange dimensions. We will quote you promptly and help you define the option that best suits your equipment. MR Accesorios Industriales, Buenos Aires, Argentina, more than 80 years supporting industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.