Piloted flange bearing DODGE FC-DL-104S

DODGE FC-DL-104S is a piloted flange bearing reference, within Bearing housings. Request a quote for FC-DL-104S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE D-Lok series piloted flange housing with Y-bearing insert is a mounted unit combining a cast iron housing with a ball bearing insert, ready to be fixed onto a surface perpendicular to the shaft. It is used to guide and support rotating shafts in transmission equipment, with the advantage of simple mounting and sealing that retains lubricant and blocks dust. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with more than 80 years of experience in industrial components.

The designation FC-DL-104S is read in parts: FC indicates the piloted flange configuration (flange cartridge), DL corresponds to the D-Lok series of insert bearings with eccentric collar locking, and the number 104 identifies the bearing size according to the usual practice of the series. The suffix S indicates the sealing variant. In the series examples, such as FC-DL-104S, the complete code allows the part to be located without ambiguity. For other sizes, the logic remains: changing the number gives access to different shaft diameters.

These housings are used in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and industrial fans. In the Argentine market they are common in food, cement, mining, aggregate processing and material handling systems. The piloted flange allows the unit to be mounted on sheet metal or steel structure, with the shaft perpendicular to the mounting plane, which simplifies alignment and reduces assembly time in equipment where access is limited.

To select the housing, consider shaft diameter, expected radial and axial loads, and environmental conditions. The D-Lok series incorporates an eccentric collar that locks the inner ring against the shaft; mounting requires tightening that collar in the direction of rotation and then securing the locking screw. Check the alignment between the flange and the shaft to avoid parasitic stresses. Factory lubrication is sufficient for most applications; in dusty or humid environments, choose the variant with reinforced sealing.

Insert bearing housings from different brands are often interchangeable if flange dimensions, shaft diameter and locking type match. The DODGE D-Lok series is distinguished by its eccentric collar fastening system, which can replace other similar mountings. When requesting a quote, provide the complete part number or the main dimensions (shaft diameter, hole spacing and pilot diameter) so that we can offer you the compatible alternative. MR Accesorios Industriales supplies the DODGE brand as part of its housing line.

If you need a piloted flange housing with Y-bearing insert, write to us on WhatsApp with the part number FC-DL-104S or with the dimensions of your application. We will quote you shortly and indicate the alternative that best suits your equipment. We can also advise you on mounting and lubrication so that the unit works with maximum service life.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.