DODGE FB-SCEZ-012-PSS flange bearing 4 holes

DODGE FB-SCEZ-012-PSS is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for FB-SCEZ-012-PSS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 4-bolt flange bracket with insert bearing from the SCEZ PSS series is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fastened to a flat surface with four bolts. It is used to guide and support rotating shafts in equipment where rigid, centered fastening is required, with the advantage that the bearing comes already housed and lubricated from the factory. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina.

The designation of these brackets is read in blocks. FB indicates the four-bolt flange; SCEZ identifies the split housing family with insert bearing of the series; PSS indicates the sealing and finish variant of the unit. The numbers that appear in the middle, as in FB-SCEZ-012-PSS, FB-SCEZ-100-PSS or FB-SCEZ-104-PSS, correspond to the bearing size and the shaft size it houses. That is why, when ordering a reference, it is advisable to send the full code: all the mounting information is there.

These brackets are seen in belt conveyors, bucket elevators, mixers, blowers and process lines in food, chemical and aggregate processing plants. In Argentina they are common in equipment that works with horizontal shafts and needs a robust fastening flange on sheet metal or structure. The cast iron housing absorbs radial loads well and keeps the bearing aligned, which simplifies maintenance in hard-to-reach areas.

To choose the correct bracket, take into account the shaft diameter, the load type and the environmental conditions. The PSS variant incorporates sealing that protects against dust and moisture, suitable for environments with particles or frequent washdowns. During mounting, check that the mounting surface is flat and clean, tighten the four bolts in a cross pattern and check shaft alignment to avoid stresses on the insert. The insert bearing is lubricated through the built-in grease fitting.

As for equivalents, four-bolt flange brackets with insert bearing are available from several brands under their own nomenclatures. The DODGE SCEZ PSS series can replace other mountings of similar configuration, but interchangeability depends on the flange dimensions, the shaft diameter and the fastening type. It is not enough for the code to be similar: the mounting plane and load capacity must be compared. If you need an alternative, at MR we will indicate the compatible option.

MR Accesorios Industriales supplies the DODGE line for plants and workshops throughout the country. If you already have the code of the bracket you use, send it by WhatsApp and we will quote it promptly. We can also help you identify the correct reference if you send us the shaft and flange dimensions.