Flange bearing 3 holes DODGE FB-PSEZ-107-P

DODGE FB-PSEZ-107-P is a flange bearing 3 holes reference, within Bearing housings. Request a quote for FB-PSEZ-107-P via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 3-bolt flange bracket with insert bearing of the PSEZ series is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed onto a flat surface. It is used to guide and support rotating shafts in equipment where a firm front mounting and simple alignment are required. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The PSEZ series designation is read in parts: the letters identify the flange bracket family with insert bearing, and the three-digit number that follows indicates the shaft size for which the unit is built. In the examples FB-PSEZ-012-P, FB-PSEZ-100-P, FB-PSEZ-103-P, FB-PSEZ-104-P and FB-PSEZ-107-P, the numeric block changes according to the shaft diameter, while the final suffix P distinguishes the mounting variant. To choose, the complete part number is the governing data.

These brackets appear in conveyor lines, fans, mixers, centrifugal pumps, belt conveyors and process equipment in food, chemical, cement and aggregate processing plants. In Argentina they are seen in installations where the shaft must be perpendicular to the structure and access for lubricating or replacing the insert is limited. The 3-bolt flange allows a distributed mounting that reduces vibration and maintains shaft position under moderate radial loads.

To select the bracket, start from the shaft diameter and the type of load: if there are axial forces or misalignment, it is advisable to check the internal clearance and the sealing of the insert. Mounting requires a clean, flat support surface, with the three bolts tightened evenly so as not to deform the housing. Lubrication of the insert bearing is done according to the duty cycle, and alignment of the shaft with the driven equipment prevents overloads. If the environment has dust or moisture, choose the appropriate protection for the insert.

As for equivalences, flange brackets with insert bearing are interchangeable between manufacturers if the shaft diameter, the distance between holes and the center height match. It is not enough for the part number to be similar: the housing dimensions and the type of mounting must be compared. If you need to replace an existing unit, send us the part number stamped on the part or the main dimensions and we will indicate the compatible alternative from the DODGE line we supply.

MR Accesorios Industriales quotes the PSEZ series flange bracket you need. Write to us by WhatsApp with the complete part number, for example FB-PSEZ-103-P, or with the shaft diameter and the flange dimensions, and we will reply shortly. We can also advise you on the insert, the sealing and the lubrication so that the mounting is right from the first start-up.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.