Flange bearing 4 holes DODGE FB-DLEZ-107-P

DODGE FB-DLEZ-107-P is a flange bearing 4 holes reference, within Bearing housings. Request a quote for FB-DLEZ-107-P via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE ER series 4-bolt flange bearing housing with insert bearing is a mounted unit that combines a ball insert bearing with a square or round flange housing, depending on the model. It is used to support rotating shafts on flat structures, fastened with four bolts. The flange allows the bearing housing to be mounted against a vertical or horizontal face, and the insert has an extended inner ring that locks onto the shaft. It is a compact solution for light and medium drives.

The designation of these bearing housings combines letters and numbers that identify the flange type, the shaft diameter and sealing variants. In the ER series, the part number begins with FB, which indicates a 4-bolt flange; it is followed by letters that define the housing design and the locking system. The three-digit numbers, such as 012, 014 or 100, correspond to the nominal shaft diameter in inches or millimeters, depending on the convention. The final suffix P indicates a specific sealing or material configuration. Therefore, when you request an FB-DLEZ-012-P, you are defining a flange bearing housing with insert bearing for a shaft of 12 units.

These bearing housings are used in a wide variety of industries in Argentina. You will find them in conveyors in food plants, in agricultural machinery, in bottling equipment and in ventilation systems. They are also common in the textile industry, in industrial laundries and in packaging lines. Their flange design facilitates mounting on chassis or frames, and the insert bearing allows shaft alignment within normal manufacturing tolerances. Being sealed units, they require little maintenance and withstand environments with moderate dust or moisture.

To select the correct bearing housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Verify that the flange has the right number of holes and the correct distance between centers for your structure. The insert seal may be labyrinth or contact type, depending on the model; choose the most suitable one if water or particles are present. During assembly, make sure the mounting surface is clean and flat, and tighten the bolts in a cross pattern to avoid deformation. Lubrication comes from the factory and does not require replenishment under normal conditions.

Regarding equivalents, flange bearing housings with insert bearings from different brands often share standardized dimensions, but they are not always interchangeable. Equivalent series may vary in the insert locking system, the seal type or the inner ring tolerance. Therefore, if you need to replace an existing bearing housing, the safest approach is to compare the critical dimensions: shaft diameter, distance between flange holes, overall height and locking type. MR Accesorios Industriales advises you to find the alternative compatible with your equipment.

If you already have the part number of the bearing housing you need, such as FB-DLEZ-012-P or FB-DLEZ-100-P, send it via WhatsApp and we will quote it promptly. We can also indicate the compatible alternative if the exact model is not available. At MR Accesorios Industriales we sell the DODGE brand and have more than 80 years of experience in the field. Write to us with the part number or your shaft dimensions and we will give you a straightforward technical answer.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.