Flange bearing 4 holes DODGE F4BSO-SCFS-010L-SHFS

DODGE F4BSO-SCFS-010L-SHFS is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4BSO-SCFS-010L-SHFS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange housing with insert bearing of the SCFS series is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fastened onto a flat surface. It is used to support transmission shafts where rigid, centered mounting is required, with the advantage that the insert self-aligns and absorbs small mounting misalignments. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina.

The SCFS series designation is read in blocks: the leading letter F indicates the flange format, the number that follows defines the housing size, and the SCFS suffix identifies the housing family with insert bearing. In the examples F4BSO-SCFS-008L-SHFS and F4BSO-SCFS-010L-SHFS, the 4 corresponds to the number of mounting holes and the 008 and 010 segments to the shaft diameter each unit accommodates. The final letters group sealing and housing configuration variants. To request a quote, the complete part number is the key data.

These housings appear in belt conveyors, packaging lines, mixers, blowers, exhaust fans and process lines in food, chemical and bulk material plants. In the Argentine market they are chosen when the shaft runs parallel to a wall or structure and a four-point flange is preferable to a pillow block. They are also used in washing equipment and cold tunnels, where the insert sealing defines service life against moisture and dust.

To select correctly, look at the shaft diameter, the load type and the environment. The insert sealing is key: in areas with water or fine particles, a configuration with a reinforced seal is preferable and, if there is pressure washing, with additional protection. Insert lubrication is replenished through the housing channel and should be done with the equipment stopped. The flange alignment on the structure must be flat and stress-free, because forcing the housing cancels the bearing's self-aligning capability.

Among brands, 4-bolt flange series with insert are interchanged by shaft diameter and by hole spacing, not by the commercial part number. Two units from different manufacturers may share mounting dimensions and differ in sealing or in the shaft locking system. Therefore, when replacing a unit, it is advisable to compare the shaft diameter, the hole spacing and the insert locking type before defining the alternative. MR Accesorios Industriales will indicate the option compatible with those dimensions.

If you have the housing part number at hand, send it by WhatsApp to MR Accesorios Industriales along with the shaft diameter and a photo of the mounting. With that data we will quote the unit and, if needed, indicate the compatible alternative from the DODGE line or from another brand that covers the same mounting dimensions. We also offer split plummer block housings from our in-house manufacturing for applications requiring another configuration.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.