Flange bearing 4 holes DODGE F4B-VSC-50M

DODGE F4B-VSC-50M is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-VSC-50M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE VSC series Y-bearing with insert is a 4-bolt flange mounted bearing, designed to secure rotating shafts to flat structures. It is used when the shaft must be perpendicular to the mounting surface and rigid, centered support is required. MR Accesorios Industriales supplies this line as a brand, with options for different shaft sizes.

The VSC series designation is read in blocks: the letter F indicates the flange type, the number that follows —4 in the examples— defines the number of mounting holes, and B indicates the split or one-piece housing. The VSC suffix identifies the insert bearing series, and the final number with M —17M, 20M, 25M, 30M, 40M, 45M, 50M, 55M— corresponds to the shaft size. Thus, an F4B-VSC-30M is a 4-bolt flange bracket for a 30 mm shaft.

These brackets appear in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. In Argentina they are found in packaging lines, grain conveyor belts and industrial ventilation systems, where the 4-bolt flange allows mounting on sheet metal or structure without additional machining.

To select the bracket, start with the shaft diameter and the type of load: radial, axial or combined. Verify that the flange has sufficient rigidity for the structure where it will be mounted and that the holes match the existing grid. The insert bearing usually comes with labyrinth or contact sealing, and its lubrication can be permanent or relubricable depending on the environment. When mounting, align the flange with the shaft and tighten the bolts in a cross pattern to avoid deformation.

DODGE VSC series brackets are interchangeable with other brands of 4-bolt flange mounted bearings that share the same shaft size and hole arrangement. This dimensional compatibility allows replacing equipment without modifying the structure, provided that mounting tolerances and the required sealing type are respected. To choose the correct alternative, it is advisable to compare shaft diameter, distance between holes and load capacity.

If you need a flange bracket for your application, send the full part number by WhatsApp to MR Accesorios Industriales. We will quote the DODGE reference or indicate the compatible alternative with the same mounting dimensions. We can also advise you on the appropriate sealing and lubrication for the working environment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.