DODGE F4B-VSC-104 flange bearing 4 holes

DODGE F4B-VSC-104 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-VSC-104 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE VSC series Y-bearing unit with insert bearing is a four-bolt flange mounted bearing, designed to secure rotating shafts to a flat structure and absorb radial loads with self-alignment. It is used in equipment where the mounting must be compact and the shaft needs freedom of self-alignment. MR Accesorios Industriales sells this line as a brand, with alternatives for every shaft size.

The VSC series designation is read in blocks: the letter F indicates the flange type, the number that follows defines the bearing size and the suffix VSC identifies the housing variant with insert. That is why codes such as F4B-VSC-008, F4B-VSC-010 or F4B-VSC-100 coexist: the shaft size and flange diameter change, not the mounting logic. Send us the complete code and we will indicate the equivalent alternative.

These housings appear in conveyors, mixers, blowers, centrifugal pumps and packaging lines. In Argentine plants they are seen in the food, chemical and aggregate sectors, where washing or dust demands a mounting that resists without losing concentricity. The four-bolt flange allows it to be fixed to sheet metal or a bedplate with simple drilled holes, and the self-aligning insert compensates for small shaft deviations.

To choose well, look at the shaft diameter, the type of load and the environment. If there is moisture or washing, a reinforced seal is advisable; if the shaft rotates fast, check the lubrication and internal clearance. During mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and only then align the drive. Poor alignment shortens the insert life more than any other cause.

Insert bearing housing series are interchanged between brands by shaft size and flange type, not by code. A four-bolt housing from one brand can replace another of equal diameter and configuration, but tolerances, sealing and load capacity change. If in doubt, send us the original code and the shaft size: we will indicate the compatible alternative.

MR Accesorios Industriales sells the DODGE line and manufactures split plummer block housings, ANSI chains and pulleys. If you need to replace a VSC housing or adapt an existing mounting, write to us on WhatsApp with the code or model you are looking for. We will quote you shortly and help you define the option that best fits your equipment.