DODGE F4B-SXRAG-40M flange bearing 4 holes

DODGE F4B-SXRAG-40M is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-SXRAG-40M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 4-bolt flange Y-bearing unit with insert bearing is a mounted unit that combines a cast iron housing with a self-aligning, sealed ball bearing. It is fastened with four bolts onto a flat face and supports the shaft in applications that require rigid, centered support. The DODGE SXR AG series is used in power transmission, conveying and process equipment that works with moderate load and needs simple maintenance.

The series designation is read in blocks. The initial letters identify the housing type: the F4B prefix corresponds to the 4-bolt flange. The SXR AG block defines the insert family and its locking system, and the final number indicates the shaft diameter for which the housing is assembled. Thus, F4B-SXRAG-40M, F4B-SXRAG-45M and F4B-SXRAG-50M are the same housing with different shaft diameters. The final M distinguishes the sealing and finish variant.

These housings appear in belt and chain conveyors, mixers, extractors, blowers, packaging lines and process lines. In Argentina they are seen in food plants, meat processing plants, mills, water treatment plants and in the metalworking sector, where the flange allows mounting onto sheet metal or structure without machining a housing bore. They are also used in material handling equipment and in machines where the shaft must be perpendicular to the mounting surface.

To choose correctly, start from the shaft diameter and the type of load: the 4-bolt flange is the option when the load has an axial component and rigidity is required. Check the sealing according to the environment: dust, water or frequent washdown require tighter protection. During mounting, seat the flange on a flat, clean surface, tighten the four bolts in a cross pattern and verify shaft alignment before rotating. Insert lubrication and internal clearance are controlled according to the duty cycle.

Mounted units are interchanged between manufacturers by shaft number, housing type and locking system, not by the complete part number. If the equipment carries a unit from another brand, what matters is the shaft diameter, the distance between flange holes and the insert type. With that data, the equivalent within the SXR AG series is found. Avoid mixing inserts with different locking systems on the same equipment.

If you have the housing part number at hand, send it by WhatsApp to MR Accesorios Industriales along with the shaft diameter and a photo of the mounting. We'll quote it and, if you need another size from the series, we'll indicate the compatible alternative. We can also advise you on sealing and lubrication according to your equipment's working environment.