DODGE F4B-SLX-115 flange bearing 4 holes

DODGE F4B-SLX-115 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-SLX-115 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SLX series Y-bearing unit with insert bearing is a 4-bolt flange mounted bearing, designed to secure rotating shafts to a flat structure and absorb radial loads with self-alignment. It is used in equipment where mounting must be simple and the bearing is contained within a flange housing. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, and advises you on choosing the correct size for your shaft and application.

The SLX series designation is read in blocks: the letter F indicates the flange type, the number that follows defines the housing size, and the suffix SLX identifies the insert bearing series. In the examples F4B-SLX-108, F4B-SLX-115, F4B-SLX-200 and F4B-SLX-203, the final numeric segment changes according to the shaft diameter each unit takes. That number is the data you should provide in full when requesting a quote, because it defines the insert and housing size.

These housings are found in belt conveyors, bucket elevators, mixers, screens and process lines in food, chemical and aggregate plants. In Argentina they are common in milling equipment, bottling lines and material handling systems where a 4-bolt flange is needed to mount on sheet metal or profile structures. The flange housing allows the assembly to be secured from the front and centers the shaft without additional machining.

To select the housing, start with the shaft diameter and the load type: radial, axial or combined. Verify that the flange has enough space for the 4 bolts and that the mounting surface is flat and clean. The insert usually comes lubricated and with seals that retain grease and block dust and moisture; if the environment is aggressive, it is advisable to check the sealing type. During mounting, align the shaft with the housing, tighten the bolts in a cross pattern and check radial play before start-up.

Regarding equivalents, 4-bolt flange mounted bearings are available from several brands with their own nomenclatures. The DODGE SLX series can be cross-referenced with equivalent lines from other manufacturers, but replacement is not automatic: shaft diameter, bolt spacing, flange diameter and insert type must be compared. MR Accesorios Industriales indicates the compatible alternative when you provide the full part number and the application.

If you need to replace a DODGE SLX series Y-bearing unit with insert bearing, send the part number by WhatsApp to MR Accesorios Industriales: F4B-SLX-108, F4B-SLX-115, F4B-SLX-200, F4B-SLX-203 or the one corresponding to your equipment. We will quote you promptly and, if you are looking for a variant that does not appear, write to us with the model or shaft size and we will guide you.