DODGE F4B-SCMED-30M flange bearing 4 holes

DODGE F4B-SCMED-30M is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-SCMED-30M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 4-bolt flange bearing with insert bearing from DODGE's SCMED series is a mounted unit that combines a cast iron housing with a ball insert bearing, ready to be fastened to a flat surface with four bolts. It is used to guide and support rotating shafts in equipment where rigid fastening and simple alignment are needed, such as belt conveyors, agitators, pumps and process machinery.

The SCMED series designation is read in blocks: the letter F indicates the housing type, a four-bolt flange; the number that follows corresponds to the flange size; B indicates that the unit includes the insert bearing. The SCMED block identifies the housing and insert series, and the final number with the letter M refers to the shaft diameter in millimeters. Thus, F4B-SCMED-25M is a size 4 flange with an insert for a 25 mm shaft, and F4B-SCMED-65M is the same housing for a 65 mm shaft.

These bearings are seen in food and beverage plants, water treatment, cement, mining and material handling. In Argentina they are found in belt conveyors, bucket elevators, mixers, blowers and packaging lines, where the four-bolt flange allows mounting on sheet metal or structure without machining. They are also used in refrigeration equipment and in agricultural machinery that works with dust and moisture.

To choose well, take into account the shaft diameter, the type of load — radial, axial or combined — and the environmental conditions. The SCMED series accepts inserts with labyrinth sealing or contact lip seal; choose the sealing according to the presence of dust, water or washdowns. Mounting calls for a flat, clean surface, bolts of the flange size and even tightening in a cross pattern to avoid deforming the housing. Insert lubrication is done through the built-in grease fitting; align the shaft before tightening the bolts.

Mounted bearings are available from several brands with their own nomenclatures. Interchangeability is defined by the flange dimensions, the shaft diameter and the insert type, not by the part number. If you need to replace a unit, provide the flange and shaft dimensions: at MR Accesorios Industriales we will tell you the compatible alternative.

MR Accesorios Industriales sells the DODGE line. If you have the bearing part number at hand, send it by WhatsApp along with the shaft diameter and working conditions: we will send you a quote shortly and advise you on the most suitable sealing and lubrication for your equipment.